Eurokera cda 2 ring induction hob instructions

Child Lock function is on.

https://www.google.com/search?q=Beko+H1164403T+induction+hob+child+lock

..

Early ones could only support heating on no more than two rings because of the power draw.

Why Is the Induction Cooktop Shutting Off While Cooking?

https://primeappliancerepairs.com > blog > why-is-the-i...
Feb 12, 2021 - Does your induction cooktop keep on shutting off while in use? Here are some of the reasons why it's malfunctioning - and how to fix it.

https://www.google.com/search?q=Zanussi+induction+hob

...

An E6 error code on a Belling induction hob typically indicates an issue with the power supply or the circuit board that controls the back two rings. Here are a few steps you can take to troubleshoot the issue:

1. Reset the hob: Try turning off the power to the hob for a few minutes and then turning it back on. This can sometimes reset the circuit board and clear the error code.
2. Check the power supply: Make sure the hob is receiving a stable and adequate power supply. Check the circuit breaker or fuse for the hob to ensure it is not tripped or blown.
3. Check the wiring: Inspect the wiring and connections for the back two rings to ensure they are not loose or damaged. Tighten any loose connections or replace any damaged wiring.
4. Contact a professional: If the issue persists, it may be a problem with the circuit board or control module. In this case, it's best to contact a professional technician or the manufacturer for assistance with repairs or replacement parts.

I hope this helps you resolve the issue with your Belling induction

i presume that you have a induction cook top. if so not all pots and pans will work on them. i have never had one but i do know this could be your type of problem. do some research on what pans to use on a induction stove.

hi i have a eurokers ceramic hob and it has not worked in about a yr. it is touch screen and only 1 mth old when problem happend it was like it over heated and now when you turn it on it flashes on the dial i cnat make out it and the hob wont come on. pls help it is brand new and dont want to throw it out.HELP PLS

your induction hob reqs.,special induction pans to make them work correctly.

safety lock is on. How can I release safety lock?

hi my name is mark, you can try softscrub or a glass cook top cleaner made by jenn- air or a genaric brand from the supermarket.

check that the hob is wired correctly underneath 1,2,3 should be linked together as live 4,5 as neutral and earth takes its place as earth,

if it is wired correctly then i m afraid the hob needs a new induction element it is all one complete unit on these hobs not seperate so your looking at £1000 + to fix it plus engineer call out charges

I have a KM5753 with FE31 and it remains after a breaker 1 minute re-set as per instruction booklet - anyone seen that one?