How do I remove Denied in Admin from a Nortel phone please advice

Canada eh? Greetings from Toronto. I removed your phone number, because this site gets 11 million views every year, and a small percentage will phone and try to scam you.

I believe the feature needs to be turned on my Bell Canada.

https://www.florenceinc.com/docs/en/Vista350-e.pdf

Or it is a false 'Message Waiting' issue which is covered here.

https://www.google.com/search?q=nortel+vista+350+red+message+light+not+turning+on

..

Remember to hit "Feature" first. Dialing **7827887 by itself does nothing.
EG;
1 - Feature **7827887 (STARTUP)
2 - Enter installer password 266344 (CONFIG)
3 - Change to template desired (square, hybrid, or PBX)
4 - Press NEXT to apply the template

Edit: Make sure you have access to the phone pool as admin and that there are no restrictions set on the phone itself. The same thing was happening to others and was detailed here
http://www.tek-tips.com/viewthread.cfm?qid=983869

It's not so much removing Denied in Admin as it is enabling whatever feature the user was trying to access at that set.
Which was... ?

Try Feature ** ADMIN (23646) and password 23646. This should let you in to make name and time changes.

You don't. Only the administrator who set that restriction can undo it.

more than likely your not in the same pick up group as the phone that is ringing. Instead of setting up pick up groups you could use feature 76 (directed pick up) if you know which set is ringing.

go to tek-tips.com they have a Nortel Norstar and BCM section in there that will get you the help.

You could have a CICS, and MICS or a Nortel BCM. Which do you have?

You will need to access admin programming, do you know how?

Press Feature 983 enter admin password
press AA
press Grtg
press Grtg again
press 1 then ok.
Greeting 1 is usually for day and 2 is usually for night depending on the tech who set it up.

Dear joanmyers,

You may want to try the CONFIG mode to change the time. Press Feature **266344 and depending on they version of the software (i.e, DR5) you may be able to change the time in the system configuration.

Good luck!