PBT156 led polaroid speakers not working

Enter one of the programming code from the list 0004 0005 0009 0138 0130 for your POLAROID TV (including LCD, LED and Plasma) device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off.

VIZIO Universal Remote Setup codes for POLAROID TV ...

and here is you manual if you need it.

https://www.directutor.com/content/user-manual-polaroid-polaroid-tlu-02241c

The back light LED array is faulty. May be it would be difficult to get the LED Array Because its comes withe the LED panel. Try to consult Polaroid service center.
If you wish to get some details; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

If your TV is bluetooth enabled, yes, just like your phone or other device.

If your TV is not bluetooth enabled, yes, with the auxiliary cable that came with your speaker. The back of your TV should have a coaxial audio out (a solitary orange port) and depending on your TV model you may be able to use the cable or get an adapter. http://www.southerntelecom.com/polariodsupport/downloads/PBT3001_battery.pdf

....does your tv have blue tooth....if not....sorry...you didnt give model of Samsung smart tv. so I cant check...

Contact support at Brookstone
Customer Service 1-800-846-3000 Computer Speakers

hold the button down and it will change to blue, then you need to make sure your phone is connected to the speakers bluetooth. then when you play music off you phone it will come out the speaker. the red light is for aux mode - where you plug your phone or ipod in.

The location of the Wireless ON/OFF switch is on the right hand edge side of the Notebook. Please see image below, it is No. 8

Please let me know if the information provided has been helpful.

1. Easy Access Buttons (5) 2. Stereo Speakers 3. Touch Pad On/Off Button LED 4. Fixed Optical Drive 5. Touch Pad 6. Primary Battery 7. Wireless LED 8. Wireless On/Off Button 9. Battery Charging LED 10. Hard Drive Activity LED 11. System Power LED 12. Mute Lock LED 13. Volume Controls 14. Headphone 15. Audio In 16. 1394 Port 17. PC Card Slots (1) 18. RJ-11 (Modem) 19. Air Vent 20. Kensington Lock 21. Power Button LED 22. Caps Lock LED 23. Num Lock LED 24. Keypad LED

The wireless button should be located on the top left part of your laptop. It will be the 3rd button from the left.

1. Volume mute button with LED indicator
2. Volume scroll zone with up/down LED indicators
3. Integrated microphone 4. RJ-11/modem port
5. Optical drive 6. Media Card Reader 7. 2 USB 2.0 ports 8. HP Fingerprint Sensor 9. Integrated stereo speakers 10. Touchpad with scroll zone 11. Touchpad Buttons 12. Hard drive activity / HP 3D DriveGuard LED 13. Battery charging LED
14. Power/standby LED
15. Wireless on/off LED
16. Power button with LED
17. HP Info / HP QuickLook button with LED indicator
18. Wireless on/off button with LED indicator
19. HP Presentation button with LED indicator
20. WLAN antennas (with WLAN option)
21. WWAN antennas (with WWAN option

reveres the poleley
if it uses led s and wires are backwords no go

With the main unit turned off, press and hold [REMAIN] on the home theater's remote for 4 seconds. (The REMAIN button is directly under the 7 button). Once held down for 4 seconds, the Volume Indicator on the main unit will turn on for 1 second. Release the [REMAIN]. 

Press the [RESET] on the back of the Wireless Receiver 2-3 times. The Standby/On LED on the front of the Wireless Receiver will blink 3 times
 
Turn on the main unit. The Link LED on the wireless receiver will light up if process is done correctly. The front of the main unit will no longer say REAR CHK and the rear speakers should now function correctly.