Just answer have taken money that l wasn’t aware of lnitially was to be $5:00 x2 but am seeing there is $56:00 taken Can’t get in contact with them either

Try to contact the site where to money went missing. Could be your bank?
Make sure the URL of the bank is an HTTPS (with the S of Secure) Most browsers make these URL's green.
We don't transfer or take money over the net. We only try to answer questions.

Please ask this to the person who has taken the money out of your account, or contact your bank. We did not take any money, so we can't help on that. Check the URL on top of the page to see you are sending your question to the correct site. Thanks.

when you log into your paypal acc. you will see all of your current transactions also a view all of my transactions shortcut bar if its not located in your most current transaction list click on the view all of my transactions shortcut

you might have to select dates ranging from the current to a specific date

open up a dispute in resolution tab you will have to find this transaction and copy the details down (date/item no/etc...(write them down) make a list of payments (money spent) also you might contact the bank or the account where your money was taken get a copy of all financial transactions
other than that

you will have to contact paypal give them a free call 1800-073-266
6.00 to 22.00 AEST/AEDT to resolve this issue

hope this helps

No. Without a memory card the camera stores the last picture taken only so you can view it to verify proper operation. It overwrites the previous picture, and it disappears when you turn the camera off.

You NEED a memory card if you want to save the pictures. Sorry if that wasn't the answer you wanted to see, but that's the way the camera works.

Press up-arrow on the multiselector (marked with a lightning bolt) to bring up the flash menu. Be aware that not all modes let you use the flash.

The camera controls the ISO sensitivity. Unfortunately, you don't have any control over it. Sorry if that wasn't the answer you wanted to see, but that's the way the camera works.

should be as easy as pressing play or a button may be labelled with the symbol for play

Mr. Douglas, Check to see if your Vibe has fuses for low beams, some cars have a seperate fuse for each light ( 1 for each high [x2] and 1 for each low [x2] thus 4.) If this is not the case it could be the switch, or the wire to the swith. It stands to reason that since nothing has changed that you are aware of, it would be one of the weak points, and those are always the contact points, e.g. switch, bulbs (not likely in this case as they went out at the same time), Since they went out at the same time it has to be a contact point that effects both of them. For this reason I believe it to be either the switch or a fuse. Please advise if I have misunderstood the problem. Thank you, and good luck!

It is due to the loose contact in your PC's mic jack. If you are a technician you can replace it yourself, otherwise contact a laptop technician.

This might be a problem the manufacturer might either be aware of or needs to be aware of. It appears you are not the only one discussing this problem on here with your player. Most of the time the manufacturer can create a firm ware upgrade that you download or install which will create a solution to this issue.

I'd recommend to contact them directly to see if they have done such a thing yet.

here is the information based upon the product information you have left on here. Also, sorry it has taken a while for our Experts to get back to you. There are lots of questions on here needing to be answered and stayed on top of.

Thanks for your time! Keep us posted.

USB-Stick MP3 Player (1GB) Documentation

• High-Resolution Image
• Manual
• Setup Guide
• Specsheet

it hates the taste of the memory you put in.
use

2GB 667Mhz DDR Memory