Vacuums Logo

Related Topics:

J
JEFF GROSH Posted on May 13, 2017

I have a Royal vacuum cleaner; canister model SR30020, the power head/carpet cleaner "pulses/shuts off for a second before resuming" seemingly under "load", the head light also goes off at that point

5 Related Answers

Geterdun

  • 184 Answers
  • Posted on Feb 07, 2008

SOURCE: Losing power to stick/floor vacuum

if you have an extension wand, the replacement will cost about $100.00. there is a way to repair both the pwr-cord on the brush assemble and the wand, but it depends on how much damage there is. also you need to check the contacts where the wand connects with the handle,and the prongs on the handle.

let me know if you still need help

Ad
advacak

Denny Adams

  • 125 Answers
  • Posted on Dec 08, 2008

SOURCE: what bags do I use for Royal canister vacuum #3004

uses a royal or dirt devil type R bag

Anonymous

  • 1214 Answers
  • Posted on Jan 23, 2009

SOURCE: Royal 3050 power head does not run

The sounds like powerhead motor either burned up, or the belt broke and got tangled in the turning motor shaft. Pull the bottom off the power head and look for a curled up rubber band. If you find one, it's the belt.

If it's the motor, you won't hear it running when you turn the powerhead on.

Anonymous

  • 231 Answers
  • Posted on Jan 04, 2010

SOURCE: I have a Kenmore canister vacuum cleaner. The

check the reset button or the wire that goes into the powermate sometimes it frays and breaks

Anonymous

  • 147 Answers
  • Posted on Nov 10, 2010

SOURCE: How to install the back

The arrows in this case should point out of the machine. not into the machine. This is because you want the black rubber seal to seal on the machine and force the air through the filter.

Good luck.
Mark

Testimonial: "Thanks very much. It seems to be assumed that we would be aware of the air flow, but it's not obvious to us. We appreciate your simple explanation."

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

My power cord doesn't retract on my Royal Lexon S20 vacuum cleaner. can I fix it myself or does it need to go in for repair

If you can get into it, it is just a coil spring that is externally or internally wound to a drum. Usually the tail of the spring breaks or comes off its anchor.

Part 20 and it is discontinued! So repair only.

https://www.ereplacementparts.com/royal-sr30020-lexon-s20-series-vacuum-parts-c-37589_37613_37654.html

..
0helpful
1answer

Kenmore canister vacuum cleaner only works with carpet attachment

You need to have hose fixed or replaced. The wiring can be off in handle.
0helpful
1answer

I need a manual for Royal 4600 cannister vacuum

I have a PDF from Royal for you.I would be happy to email it unless it is possible to post it here..?
0helpful
2answers

Dc 39 canister carpet brush will not turn

on the head there is a round filter type part if that is pushed in the the brushes won't turn. try pulling it out slightly.
0helpful
1answer

Why wont the brushes spin

check the belt is ok and the brushes are switched on
3helpful
1answer

I have a Kenmore canister vacuum cleaner. The

check the reset button or the wire that goes into the powermate sometimes it frays and breaks
0helpful
1answer

Auto-matic suction shut-off didn't resume once tank was emptied

look on the bottom of the tank and there should be a fitting on there take it off and clean..there should be some hind of float inside the tank.turn it right side up and tap on the tank the float might be stuck
1helpful
6answers

Royal 3050 power head does not run

The sounds like powerhead motor either burned up, or the belt broke and got tangled in the turning motor shaft. Pull the bottom off the power head and look for a curled up rubber band. If you find one, it's the belt.

If it's the motor, you won't hear it running when you turn the powerhead on.
0helpful
1answer

Carpet power head will not stay attached to telescoping wand

to answer your last statement, if you do not have a receipt, the warranty will go by the date ofyour serial number. the first 4 digits are the month and year. this model usually has a 1 year wty. the wand button may not be protruding as far due to dirt under the metal band. however you may still have an issue with the neck on the powerhead which will require shop service.

I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_b96ba3f038cf317c

Not finding what you are looking for?

133 views

Ask a Question

Usually answered in minutes!

Top Royal Vacuums Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Royal Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...