Measuring Tools & Sensors Logo

Related Topics:

Sherrie Hand Posted on Jan 01, 2017

How long does it take to charge the Stanley pro amp 450 fatmax

5 Related Answers

K W

  • 509 Answers
  • Posted on Feb 01, 2010

SOURCE: I cannot open the Stanley FatMax Retractable

Try this website and scroll down to product description...

http://www.amazon.com/Stanley-10-777-Locking-Retractable-Utility/dp/B00009OYFP

Ad

Anonymous

  • 1 Answer
  • Posted on Apr 11, 2010

SOURCE: Just purchased a Stanley FatMax 10-778 retractable

1. Make sure the side lock is unlocked.
2. Push the thumb tab all the way to the front of the blade handle.
3. Insert the blade in the opening, you may notice two notches on the top side of the blade.
4. Press the small blade release button as you slide the blade into the knife. You may have to jiggle up and down to get the two notches on the blade fully into the handle.

If properly inserted, the exposed area of the blade should look very close to an equilateral triangle.

make sure both notches of the blade are inside the handle. They notch into the thumb lever.

good luck

Testimonial: "Thanks so much!"

Anonymous

  • 90 Answers
  • Posted on Jan 25, 2011

SOURCE: how to recharge stanley 450

There is a male 120V plug on it that you connect an extension cord to.

Anonymous

  • 3 Answers
  • Posted on Feb 15, 2011

SOURCE: I bought A Stanley 450

not sure if you found this yet but it is actual made by Baccus Global under the stanley name.

http://www.baccusglobal.com/faq.php


Q: How do I know when my Jump Starter is fully charged?
A: All of the Baccus Global jump starters have a battery status indicator, units can have 2 - 4 LED indicators when all of them illuminate and the green one flashes the unit is fully charged.

Anonymous

  • 7 Answers
  • Posted on Jul 31, 2012

SOURCE: Loading instruction to change blade on Stanley

Hmmmmm.... that sounds really confusing.

Better yet... just watch this video! http://www.youtube.com/watch?v=B8Q1p-8jkyE

It's actually pretty easy! :)

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer

Stanley Fatmax 1000 Peak Amp Power Station. How do you turn off the backlight please?

Question edited for clarity.

The LED Area Light or the Unit display. The backlit display always stays on to alert you to the internal battery status, so that when you come to use it, it should be fully charged.

https://www.manualslib.com/manual/2188388/Stanley-Fatmax-Pp1dcs.html?page=2&term=light&selected=1#manual


1helpful
1answer
0helpful
1answer

How to get the app to conect my stanley fatmax powerit 1000A to my phone.please help.

I have just read the device instructions and although the device offers usb charging or power up to half an amp it does not and cannot communicate digitally...
0helpful
1answer

Stanley Fatmax 450 Amp (Model J45TK)compressor starts and then stops right away. The charge is full showing the green LED light on.

You will likely have to open up the case to look inside.
The main components will be a circuit board, a 12v power supply, a 12v air pump and a 12v rechargeable battery. It sounds like a loose connection on the air compressor pump. When you turn it on it normally vibrates and is loud. This may be enough to shake loose a wire connection. If so it should be an easy fix to crimp or solder.
1helpful
1answer

How can I tell when my stanley 450 amp instant starting power station is fully charged?

I would suspect that the internal battery has reached the end of its life. Surely there is a green light to indicate when it is charged?
0helpful
3answers

How do I charge the Fatmax 450 Amp by Stanley

It should come with a DC or AC charging plug. All you have to do is plug it into either the 12v socket on your car, or your AC wall outlet, depending on which plug(s) you have.
0helpful
1answer
0helpful
1answer

Stanley fatmax 450

Open up the case and look inside. A wire may have come off.
i had a brand new compressor that wouldn't power on. A wire was not connected. After reconnecting and a positive testing I put it back together. It ran for five minutes and stopped. It turns out the wire was too short (factory install) and came disconnected each time the compressor was turned on due to the vibration. I rerouted the wire so it wasn't so tight. Problem solved.
Not finding what you are looking for?

1,238 views

Ask a Question

Usually answered in minutes!

Top Stanley Measuring Tools & Sensors Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66974 Answers

Steve Pack
Steve Pack

Level 3 Expert

7128 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39391 Answers

Are you a Stanley Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...