Office Equipment & Supplies Logo

Related Topics:

S
Steve Posted on Nov 01, 2016

Lanier 7320 How can I put the auto feeder down as the screen asks

5 Related Answers

MUKHTAR

mukhtar21 shaikh

  • 2022 Answers
  • Posted on Nov 30, 2007

SOURCE: black line when scanning though auto feeder

pls clean the side glas of scnner with tissue paper ther is two type of glass is there one is a4 size and second is normal slim one so pls clean the slim one with wet tissue paper and see is ti clean .


bye

Ad
Bubbabear64

Tim Babcock

  • 2794 Answers
  • Posted on Jun 09, 2008

SOURCE: Lanier 7320 - Makes only all black copies

Was the toner bottle removed before you moved the machine?

Anonymous

  • 1 Answer
  • Posted on Dec 28, 2008

SOURCE: Auto document feeder

Did you make sure the tape is removed inside the Document feeder,or maybe you need to check to see if anything is stuck in the rollers. Open the door (if you have not already done so) to the document feeder and you will see pictures on the inside showing how you can remove and/or change the roller (make sure everything is put back as the picture. Good luck, I hope that is all that is wrong with it.

Anonymous

  • 158 Answers
  • Posted on Apr 29, 2009

SOURCE: lanier 7320 error message c-41 can someone tell me whats wrong

I believe c-41 is a fuser problem. A trained copier tech may be required to troubleshoot.

Anonymous

  • 1126 Answers
  • Posted on Sep 23, 2009

SOURCE: Lanier Model #7320 Copier SN 826255. Has a wrench

Press "clear/stop" and "8" at the same time. An error code will be displayed in the copy quantity window as long as those two button are held down. What is the error code? Each code is specific to different areas of the copier. I will be more than happy to assist you in resolving.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Very light copy in 2nd side copy

its a moisture issue in the paper. try nice new dry paper and i bet it works fine
0helpful
1answer

I have a black line on my copies. i have a lanier 7320 copier. Is it my drum?

It could likely be the drum. Is the line on copies and prints, or just copies? If it's just on copies, it's not the drum.
2helpful
1answer

I have a lanier 7328/7320. It reads side door open on screen. Only the door is closed. Any suggestions

How are you? This is a problem with front door switch.
Remedy
  • Place the machine on a level table and make sure all the four stands are landing freely on this table.
  • Check that the front door notch that closes the door switch is not broken and if it is replace that particular door or modify the notch.
  • Make sure the upper half of copier is well locked with the lower bottom part.
If all the above is correct, and still reads open, replace the door switch.
Good luck.
0helpful
1answer

Lanier Model #7320 Copier SN 826255. Has a wrench

Press "clear/stop" and "8" at the same time. An error code will be displayed in the copy quantity window as long as those two button are held down. What is the error code? Each code is specific to different areas of the copier. I will be more than happy to assist you in resolving.
1helpful
1answer

Lanier 7320 error message c-41 can someone tell me whats wrong

I believe c-41 is a fuser problem. A trained copier tech may be required to troubleshoot.
0helpful
1answer

Auto document feeder

Did you make sure the tape is removed inside the Document feeder,or maybe you need to check to see if anything is stuck in the rollers. Open the door (if you have not already done so) to the document feeder and you will see pictures on the inside showing how you can remove and/or change the roller (make sure everything is put back as the picture. Good luck, I hope that is all that is wrong with it.
0helpful
1answer

Misfeed on lanier 7320

I like your pictures.... Have you tried to clean the feed roller with a slittly damp rag with Simple Green or WD-40? You can try that and wipe the extra off. They both clean the rubber roller's. If that works good, that means the feed rollers are worn and need replacing. But you may also need the paper pick-up feed clutch. You said you can still run paper throw the by-pass. Good Luck
0helpful
1answer

Lanier 7320 - Makes only all black copies

Was the toner bottle removed before you moved the machine?
0helpful
1answer

Misfeed on lanier 7320

Sounds like a dirty sensor or a small piece of paper stuck. Check the feeder, left side, underneath. There should be a switch actuator
in the paper path that is visible. Also, on the right side, check all of the openings for anything stuck. If you have no luck, get some canned air and blow out everything. If its still jammed, it can be easily unplugged in the back of the machine, and the machine section will still operate.
0helpful
1answer

Printer problem

You need service on your copier. It might just need a cleaning, or possibly a part. If they are random spots on your copies, then there is a good chance the cleaning unit seal needs to be replaced.
Not finding what you are looking for?

32 views

Ask a Question

Usually answered in minutes!

Top Lanier Office Equipment & Supplies Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66980 Answers

Are you a Lanier Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...