I factory reset my motorola blur when the triangle appears my keyboard wont work

Factory Data Reset is a tool used to remove everything that was imported, added or installed on the device. Keep in mind, when using this feature; everything is deleted. Nothing stored on the MicroSD will be affected. Your information is automatically backed up to the MOTOBLUR server. Your information will be restored when you login with your user name and a password.
Factory Data Reset

1. From the screen of your phone, open the Applications Tray. (circle located in the middle at the right of the display screen) Or press the Menu button on the left from your screen.
2. Tap Settings
3. Scroll down and tap Privacy
4. Tap Factory Data Reset
5. Tap Reset Phone

If you are unable to navigate through the menu to perform a factory data reset, you can follow the steps outlined below:

1. Power off the phone, press and hold volume down button, press power button.
2. Wait for the "triangle ! / Android" screen then release the volume down button
3. Tap lower right-hand corner of Touch Screen
4. Navigate on-screen menu to select "Wipe" (data/factory reset) and Press OK
5. Navigate on-screen menu to select "Reboot System Now" and Press OK
6. Wait for device to reboot

Has this phone been rooted or has the software altered? you can try this, but will reset to factory settings (will delete phone data):

1. Power off the phone, press and hold camera button, press power button.
2. Release the camera button when prompted (following the Batwings boot screen).
3. Press the volume down button and wait for the "triangle !" screen.
4. Open keyboard and press Alt L keys, then press Alt W keys.
5. Wait for device to reboot
6. After Factory Reset, Select "Register New Blur Account" during the setup process.

If this doesn't work then the phone will require further service/repair.

When you get to the Motoblur screen press and the 4 square icon until a keyboard appears and type [alt]E[altE] BLUROFF it only works one time and you have to do it each ti,e you see the BLUR sign up page

Go to accounts and delete Blur account. Best, factory reset and start with a new Blur account.

To reset your phone to factory settings and erase all the data on your phone,

* Touch Menu > Settings > Privacy > Factory data reset > Reset phone.
Warning: All data on your phone will be deleted.

Motorola Droid Hard reset with keys

* Power off device.
Press X key on hard keyboard + power button, then release both buttons.

When you see exclamation point press and hold VOLUME UP + CAMERA KEY. You will see Android system recovery menu.
With D pad go to data / factory reset, then press CENTER D Pad, then choose Yes.


good luck...

To Hard Reset the Motorola BLUR MB300 quite differs from other Motorola ANDROID phones.

Do back up all your data stored on your device before doing this procedure, this process will delete all the data on the phone but does not delete the data stored on the microSD memory card.

To hard reset Motorola BLUR MB300
1. Power off phone.
2. Hold camera button and power on phone at the same time.
3. Release the camera button when prompted to.
4. You will see a message screen telling you to press the up or down volume button
5. Press and HOLD the down volume key (ignore message 'Volume Up Key Pressed')
6. When triangle and phone screen appears
7. Press on the screen just above the back key
8. You will now see the "Motorola system recovery" menu
At this point you will have three choices:

1. reboot system now [Menu+Back]
2. apply ssdcrad:update.zip [Alt+S]
3. wipedata/factory reset [Alt+W]
You can simply tap an item to select it.

At the bottom of the screen you can select OK to apply your choice from the menu.

There is also an opportunity to select Hide on the bottom left, I don't know what that does (I tried it and nothing happened).

Selecting Wipe data/factory reset and tapping Ok and the screen changes to a box and a phone (Get it - out of the box) and you see what is happening on the phone.
pick 2
-- Wiping data...
Formatting DATA:...
Formatting CACHE:...
Data Wipe Complete.

Press Menu+Back to reboot

pressing Menu+Back did nothing for me so I tapped 'reboot system now' on the menu and Ok.

The phone restart then will restore back to its factory default state.

Reset Motorola Cliq 2 using hardware buttons

• Make sure your phone is turned off
• Press "x" key from keyboard and then press "Power" button
• Release the "x" key when a "Triangle!/Android" screen appears
• To view recovery menu press "@" key
• Choose "wipe data / factory reset" using navigation keys (left/right), press "Enter" key to select
• Choose "reboot system now" and press "Enter" to select and wait for the device to reboot and reset Cliq 2

1. Power off the phone, press and hold camera button ( do not release), press power button until phone turns on.Release power button while holding camera button down.
   
2. Release the camera button when prompted (following the Batwings boot screen).
   
3. Press the volume down button and wait for 15 seconds for a "triangle !" to appear on the screen. ( message "volume up key pressed " will appear )
   
4. With flip closed, tap bottom right corner of darkened display (just above back button).
   
5. Select "wipe data / factory reset" on screen
   
6. Press "Ok". Wait for "data wipe complete" message to appear
   
7. Press "reboot system now"
   
8. Press "Ok" . Phone will reboot and complete master reset function

Notes:

DO A HARD RESET ON IT
*Turn the Droid off. If it won’t turn off, take the battery out then place it back in.
*Open the keyboard and press the X key while pressing and holding Power. The device will power on. Keep holding the buttons down until a yellow triangle appears.
*Press the Camera and Volume Up buttons at the same time to get to the menu. (I had to press them several times).
*Use the direction pad to the right of the keyboard to select the Format option

www.usedcellphoneshop.com