Can not turn volume up. working but at 100% very hard to hear

Can you hear your neighbors banging on the wall to turn it down?
You may need to talk with an audiologist to get some answers regarding possible equipment that has the right frequencies and volume you need.

When your watching tv you must be using a cable box or a pvr that has it's own volume control. Make sure it's volume is at it's max and then use only the volume of the tv.

I think the only solution for you my friend will be too invest in a headset of some kind which should plug into your unit which will help you to hear better.

right click on the speaker icon in the system tray on the bottom right side of the screen and then click to open the volume mixer then make the speaker sound level to 100 %.

or go to the control panel from there click on the sound or speaker icon to open it after that go to properties and then make the volume level to 100%.

This should help to fix the problem.

Most likely a defective speaker. Please see this link:

http://www.sharc.net/gps_audio_repair.htm


- Jim

Hello drive2darim,

OK first check you converter box, Cable TV/ Satellite TV volume control and turn it up to 100%.

Then check the menu on your TV for audio settings and set them to there default settings. This should take care of this issue.

I hope this helps,

Thank you,

Shuttle83

http://www.electron-age-technologies-llc.com

If it's just playing DVD's that the volume is low some DVD players have their own volume control.
You could look at the back of your tv and see if the dvd or psp is hooked up to a "line in" or a 'variable' input. The Line in is a constant audio source. The variable will be also affected by the volume on the TV.

I am sure you did this but recheck your audio menu on all your inputs. I have found that cables can go bad so make sure they are in good shape. Are you haveing the problems with all your inputs dvd, cable (direct cable or a cable box) whatever? It is hard to affect the audio by just moving the set. I am hoping that you changed something or the cables went bad that would be the easy solution.

Good Luck!

make sure that the earpiece volume control on the left is all the way on.