Well my lg was rebooted and started uo agian with the start up wizard and then a unfortunatly the process com android has stoped and won't do nothing else

Try a hard reset. Disconnect your Android TV Box power cord from the back of the device. Press and hold the reset button by inserting a paper clip or toothpick into the pin-hole (don't let go) RESET BUTTON IS INSIDE THE AV PORT. While pressing the reset button, reconnect the power cord to the Android TV Box

If you want to achieve more with your Android smart phone, you can act as the following steps to root your device.
Before rooting your Android smart phone, please:
1. Download CF-Root-SGS2_XW_INU_KL1-v5.0-CWM5.
2. Download Odin3v185.
Step 1: Download CF-Root-SGS2_XW_INU_KL1-v5.0-CWM5 and unzip it on your computer. Then press the "Volume Down" and "Home" buttons of your Android device at the same time for several seconds. So that your phone will be rebooted into "Download Mode".
Step 2. Connect your Android phone to computer via a USB cable. After that, extract Odin3v185 and check the "PDA" box. Double click the CF-Root-SGS2_XW_INU_KL1-v5.0-CWM5.tar, soon you can get a menu as shown.
In this step, please choose "Auto Reboot" and "F. Reset Time", then press the "Start" button to continue.
Step 3. Wait for a while. After getting a "Pass!" on your computer and "Turn off" on the Android phone, please disconnect your Android smart phone and computer.
Step 4. Press "Volume Up" and "Home" at the meantime to reboot your phone to the "Recovery Mode".
Step 5. Select "Wipe data/factory reset" and "Wipe Cache" step by step. At last, tap "Reboot System Now", your Android phone will be restarted at once.
You can work this Coolmuster Samsung Contacts Recovery software to restore lost contacts and text messages from your Android phone at will.

Simple Steps to Root Android Mobile Phone

This may help
http://www.androidpit.com/process-com-google-process-gapps-has-stopped-fix

Try and download a new keyboard, there's an app for a keyboard called Swype that works much better than the original. If you can't type to go to the link, I'll link you to it so that you can download it, and install it.

Once you've installed it, simply enable it in your keyboard settings in Settings.

https://play.google.com/store/apps/details?id=com.nuance.swype.dtc&hl=en

if you're using a custom ROM re-flash GAPPS. Otherwise try to factory reset

Ok, I would say to reset your phone by code, just dial

• Dial 3845#*54#
• Now select Factory reset

But obviously it won't work because Android is corrupted.
I will leave this link which will explain how to hard reset your phone without using Android, and I hope it works. Hard Reset LG GT540 Swift

No it won't.The brake switch is for brake light,interlock shift solenoids,transmission TCC controls,and stoping the vehicle, You fan blower has a completely different power supply that is independant from the brake electrical system, For you fan blower to operate its either the fan resistor blower or the fans control switch to the fuse

try starting your laptop in safe mode by pressing f8 during the boot up process