232 sq inches to sq ft? - Miscellaneous

Allow me to rephrase your question... You want to know the volume of water necessary to saturate a 4ft by 4ft area to a depth of 4 in?


Start with the square of the area and convert units to inches.
4'x4' = 16 ft. sq.
1 ft. sq. = 144 in. sq.
Thus 16 x 144 = 2304 in. sq.


Now sum the cubic inches to depth of 4"
2304 x 4 = 9216 in. cu. total necessary water volume.


Since US residents typically measure water volume by gals. convert inches cubed into gallons. 231 in cu / gal (US)
9216 / 231 = 39.8 gal.

So about 40 gallons of water would be needed to saturate a 4ftx4ft area to a depth of 4 inches.

divide both dimension by 12 to get feet the multiply those feet measurements to get square feet or multiply the inch dimension to get square inches and then 1 sq " =.0069 sq ft that is 76 X 69 =5244 sq "=36.416 sq ft

3X23= 69 sq feet. Gotta get two rolls and there will be left overs.

break it down to inches then multiply the inches then divide that answer to get back to square feet
11 feet is 132 " + 6" =138"
13 ft is 156"+2" =158"
138 X158 =21804 sq"
1sq" =.006944 sq ft or
1sq ft=144 sq"
21804 divided by 144 = 151.4166 sq ft

First change the inches into feet 232 / 12 = 19.33 feet Actual square feet is calculated by (in feet)
multiplying length x width

...Re-reading the question: I just noticed that the 232 is ALREADY converted to SQUARE feet!
Duh!
So... 232 Square Inches (144 Square Inches per each Square Foot) is 1.61 Square Feet. Square inches / 144 = Square Feet
Your answer is just a little over 1 1/2 square feet, and shy of 1 3/4 Sq. Ft.

0.368 hectare
0.909 acre
3679 sq meter
0.003679 sq kilometer
39600 sq ft
5.702 million sq inches

AC is approx. 145 lbs per cubic ft.
there are 27 cubic ft in 1 cubic yard
60 tons x 2000 = 120000 divided by 145 = 827.58 cubic ft divided by 27 = 30.65 cubic yards

square yards would depend on thickness of AC.
you can take thickness x sq ft to get cubic ft

in concrete 1 cubic yard =
4 inch thickness = 81 sq ft or 9 sq yrds
6 inch thickness = 54 sq ft or 6 sq yards

Simply square the conversion factor between feet and metres to get the conversion factor between square feet and square metres.

One foot is 0.3048 metres, so squaring that gives one square foot is 0.09290304 square metres.

The area is 1700 sq. inches or 11.8056 sq. ft

That's 9.25 ft by 8.33 ft = 77.05 sq ft. I plugged that in at onlineconversion.com and got 77.05 square foot = 7.158 179 232 square meter (or 7.16 sq meters)