Need Vizio TV code for my Samsung HT-X50 home theater remote!

What about an original!
http://www.amazon.com/Remote-Control-Samsung-HT-X50T-Theater/dp/B00ILAQWBM

hi,
Need the model number of the samsung Home home theatre system to give to correct code.
OK

Click the Download Document Hyperlink on this page: http://www.retrevo.com/support/Samsung-HT-X50-Home-Theater-Systems-manual/id/2771dj596/t/2/

The Samsung AH59-02291A remote came with several Samsung Home Theater systems, including the HT-H4530 and the HT-H5500W. The remote is not a universal remote and will not control other devices. You can learn a bit more about the remote by looking at the manual for the home theater system that it came with. The HT-H5500W manual is available on that product support page: https://www.samsung.com/us/support/owners/product/2014-5-1-channel-blu-ray-home-theater-system-ht-h5500w. If you need a universal remote to control the home theater system, look for one manufactured and programmed after 2014 for the 2014 HT-H5500W.

I hope this helps.

Cindy Wells

Look into the TV's audio controls. If it was my setup, I'd NOT send audio through the TV to the hifi, nor video through the hifi to the TV. Additional hops and interconnects cause problems even though they're theoretically transparent.

You have to reset the connection:

With the home theater system off, press the 0-1-3-5 buttons in that order on the home theater's remote control.

Power on the home theater system.

With the wireless module on, press the [ID SET] button on the back of the wireless module for five seconds.

If your home theater continues to display rear check after you have tried the steps above, call Samsung Customer Care at 1-800-SAMSUNG (1-800-726-7864). Have your model number and serial number on hand to set up service.

Hope this helps!

Hi,
You need to put away the remote for your TV and use only the remote for your HT system. Your HT remote should work on your TV by default. Your Samsung HT remote should have a TV button and a DVD/Receiver button (or HT button). When using only the TV, press the TV button and then use it for just the TV and when using the HT system, press the DVD/Receiver button and then you can use the HT system.
If for some reason your TV is not set on the Samsung HT remote by default, your HT users manual should have a list of codes that you can use to program your HT remote. Hope that helps you. Gary

Start with code 19. If it does not work try all the Daewoo codes..

you need to format as fat32... use a mac computer... otherwise it wont recognize it... no NTFS... just fat32... that is how i did it.. hope this helps you.

what u meen usb ? style thats only for music players u could use nero 7 or 8 verison make a dvd slide show of your pics with music thats coolest way