Feeder / roller problem on epson dx6050

DO NOT TIME MAINTAIN OF YOUR CARTRIDGE MOVE

Try these video guides. One video is on the paper jams inside printer and the other is on Document feeder.

Sometimes dried ink on the roller causes it to incorrectly "grip" the paper, making it slip in one section and pull to the side, Check the rollers for Ink and other dirt.
Also try less paper in the feeder, it may simply be too much and is not able to feed it correctly.
Hope this helps GM

If the paper feeder stuck, do the following:

1. Gently pull any jammed paper out from the output tray or sheet feeder.
2. If paper is stuck inside, open the printer cover and remove the jammed paper, including any torn pieces. Then close the printer cover.
3. If paper remains near the sheet feeder, press the paper feed roller lever inside the paper feeder to release the jammed paper, then carefully pull it out.
4. Load the paper correctly.
5. Press the stop button to resume printing.
   

If the printer continues to jam or misfeed paper, and you are certain that there are no foreign objects lodged down inside the paper feed area, your printer may require service. Please call Epson technical support for further assistance.

***hi there,il be willing to help you on that. ****
there is a great possibility that the rollers of the printer is having an issue. but try there steps first , do a self test on the printer, run a blank sheet of paper, if it jammed, that means the printer itself is broken
put plain paper in the sheet feeder, then press the start button. if it jammed, remove the paper jam and try again.
***if my troubleshooting steps are helpful, pls vote for me, i will appreciate it, so that I can be a part of fixya, thanks, Godbless****

Did you replace paper feeder with new one? Most paper feeder problem are rubber at paper pick up roller (bottom side) and small spring at bottom paper pick up roller. Check for "something" slip at paper feeder and lubrication at paper feeder mechanic.

your paper feeder or paper roller may be dirty/dusty on one side and need cleaned to fix this

please clean the paper pickup roller and check paper quality

There might be small peice of paper stuck in the paper path. use a flashlight to see if there are any obstructions in the machine. use a thick peice of card stock to maybe push the paper out.

I’m happy to help further over the phone at https://www.6ya.com/expert/eric_7148ad2a373711a3

Clean the rollers down where the paper sets in the printer. Do not use cheap generic matte coated paper. Some generic matte coated paper will leave a film on your rollers and cause them to not grip the paper.