SOURCE: Plantronics Voyager 500a Bluetooth Headset
Try re-syncing the headset to the base unit:
http://plantronics.custhelp.com/cgi-bin/plantronics.cfg/php/enduser/std_adp.php?p_faqid=8165&p_created=1128461658
SOURCE: I lost my ear piece
1. On the base, press and hold both speak volume fine adjust buttons
until the blue talk/on line indicator light and red power indicator
light (on the front of unit) start to flash.
2. On the headset, press and hold the listen volume adjust + button and
call control button until the status indicator flashes red and blue.
3.
Pairing is complete when the talk/on line indicator on base illuminates
solidly, and the status indicator light on headset flashes blue.
Important: Make sure your headset is not connected to any other Bluetooth device when attempting to pair.
Good luck from Headsets Direct!
90 views
Usually answered in minutes!
×