Bassinet with metal shelve on bottom

Are you using 10 weight oil or lighter?
Oil all metal on metal moving parts(bearing surfaces).

www.brother-usa.com/homesewing/simplicity-sewing


www.sewingpartsonline.com > Instruction Manuals

It's easy. Hold the main skirt fabric and drop the pressboard support into the bottom with the feet/nubs down away from the inside. Now the metal frame drops in and next slide the hinged U supports outward. This raises the edges and gives height to the bassinet. The U supports either lock under a plastic clasp on the pressboard or sit into holes on the board. Now button down all the buttons around the interior or zip the zipper closed. Set it back on the frame and snap the bassinet to frame snaps on. Add the hood and baby's new, clean bed is ready for a lullaby. Good luck and you should be able to download a PDF version of the instructions from the maker. Just go to their site and search.

Hello. go to the company website at this link http://www.kolcraft.com/jeep/bassinets/241-cuddle-n-care-rocking-bassinet-with-light-vibes-mobile

find your exact bassinet and then go to the bottom of that page to download the instructions. Joe

4 thumbs up please. thanks.

It's easy. Hold the main skirt fabric and drop the pressboard support into the bottom with the feet/nubs down away from the inside. Now the metal frame drops in and next slide the hinged U supports outward. This raises the edges and gives height to the bassinet. The U supports either lock under a plastic clasp on the pressboard or sit into holes on the board. Now button down all the buttons around the interior. Set it back on the frame and snap the bassinet to frame snaps on. Add the hood and baby's new, clean bed is ready for a lullaby. Good luck and you should be able to download a PDF version of the instructions from the maker. Just go to their site and search.

Here is the link to download the instruction manuael for your bassinet:

http://kolcraft.com/product-instructions.aspx

You will need to choose the model number for your product at the bottom of the page.

Go to www.kolcraft.com and click on the product instructions link. Towards the bottom of the information page you'll see a small box with a serial number next to a link button that says "open." Click on the box, scroll down to "18264" ("PT" is omitted), then click open. Printable instructions can be found.

Put the metal frame on the board - then turn them upside down. The skirt has four slits - where the knobs on the bottom of the board come through - pull the material tautly while snapping on buttons.

You can call 1-800-544-1108 to get replacements parts.

simply screw the metal hinges facing up and snap them into place

Here is the link to the manual; http://www.gracobaby.com/assets/pdfs/instructions/ISPP031AA.pdf Please post again if you need more help :)