Behringer Sx2442fx Eurodesk 24channel Mixer New Logo

Related Topics:

A
Anonymous Posted on Jun 02, 2014

How to repair a channel on a Behringer SX2442FX Eurodesk 24-Channel Mixer

Channel 6 input is dead.

4 Related Answers

Anonymous

  • 7191 Answers
  • Posted on Jan 15, 2010

SOURCE: I need an owner manualfor a Behringer pmp 3000 16 channel mixer

Hi,

You can download the manual by clicking this link

You'll require Adobe PDF Reader installed on your PC to view this manual. If it is not already installed on your PC, download it free from:

http://get.adobe.com/reader/

Hope this solves your problem. Thanks for using FixYa

Ad

Fred Yearian

  • 5603 Answers
  • Posted on Mar 01, 2011

SOURCE: HI, My behringer 32 channel eurodesk mixer's some

Has somebody spilled liquid into the unit? Are you using XLR to XLR mic cables? If using condenser mics you need Phantom power on else NOT.

If the faders are noisy, use CRC226 in them. You can get that at Home Depot in the electrical dept.

NEVER use contact cleaner such as Deox.it or BlueShower in faders... it wrecks them

Fred Yearian

  • 5603 Answers
  • Posted on Aug 06, 2011

SOURCE: how do you connect behringer sx2442fx eurodesk

WIthout a quality audio interface the answer is you don't... You need to procure an audio interface for the computer. The internal audio systems of computers are too noisy to get decent results. The manual for the mixer will show the typical studio connection with a suggested audio interface.

Anonymous

  • 1 Answer
  • Posted on Nov 13, 2011

SOURCE: Please, I have a Behringer Sx2442fx Eurodesk

yes practically you can use, only make sure you balance the total output frequency

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Behringer Eurodesk SX2442FX Interface communication issues

With all your plugging in of unsuitable stuff into sockets not designed for them there is a very good chance you'll have blown parts of the mixer. It is apparent you have little idea of what an insert is or the difference between a line and a mic in (or between an in and an out for that matter) I would strongly suggest you stop playing and probably causing damage, read the manual from cover to cover, and if you don't understand it find someone who will help you. I'm sorry but you really are not helping yourself at the moment.
0helpful
1answer
0helpful
1answer

I have a Behringer sx2442fx mixer,and when i try to use my aux 1 and 2 channels for monitors it doesn't seem to be working. I sthere a chance that i have a button or something on the board thtas p

Make sure that you have enable the main monitor volume at the end of the mixer. They are labeled AUX1 and AUX2 as well located under the last channel of the mixer. If those are on 0 your monitors won't work
1helpful
2answers

My band plugs into the input channels on the SX2442FX mixer, which we then hook up to the PMP2000 to use as a PA. Since the SX2442FX is not a "Powered" Mixer, I figured that we should be going...

Either way will work, however your friend's method probably would be slightly better since it goes through less stages within the PMP2000. The "left and right power amp inputs" are the INPUTS to the power amp in the PMP2000 and hence are the best places to connect the mixer if using the PMP2000 as only a power amp. Note doing this will LIKELY disconnect any other input to the PMP2000 from the power amps in it... that is all the preamps in the PMP2000. DO USE TRS cables!!! and power both units from the same receptacle to avoid ground bounce.
0helpful
1answer

How do you connect behringer sx2442fx eurodesk sttudio mixer on acomputer in studio

WIthout a quality audio interface the answer is you don't... You need to procure an audio interface for the computer. The internal audio systems of computers are too noisy to get decent results. The manual for the mixer will show the typical studio connection with a suggested audio interface.
1helpful
1answer

The cd/tape (standby) button stuck on Behringer SX2442FX Eurodesk Mixer. The button is stuck in the down position, placing all inputs other than the RCA jacks for the CD/TAPE inputs into STANDBY mode......

First thing is to get a can of CRC226 from Home depot in the electrical dept. Put a little on a q Tip and work it into the area between the button and the panel. work the button a little bit sideways. Using the point of a scalpel or Xacto knife from one side, gently pry up by sticking the point into the side of the button and levering it up. Once it is up, apply more CRC226 around to lube the button. Be gentle... often contamination gets between the button and the hole in the panel.
0helpful
1answer

I have a Behringer sx3242fx, mono input channel #2 mute button got stuck in (pressed in), i.e. the channel cannot be un-muted no matter how it is pressed. Any suggestions?

Put a tiny bit of CRC226 around it to lube the button. Then CAREFULLY use a scalpel to encourage it to come up. Then put a little more 226 around it.
0helpful
1answer

How to use a mixer board

Input at each channel XLR or 1/4 ", at faders(bottom) are assignment buttons for sub groups or to stereo out put and main faders drive audio to amps.
Not finding what you are looking for?

639 views

Ask a Question

Usually answered in minutes!

Top Behringer Music Experts

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you a Behringer Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...