Casio se s300 ERROR E09 - Casio Cash Register

http://totalpos.co.nz/wp-content/uploads/2012/10/Casio-SE-S300.pdf

From page 88 onward...

Cheers

This Casio error code normally means there is no programming in this machine and it is waiting to be fully re-programmed. If the machine is new, this is normal since it will have no programming yet.If you need an SE-S300 programming manual, one of our users has it here:
http://the-checkout-tech.com/manuals/cashregisters/Casio_SE-S300_users_and_programming_manual.html

This means the machine has no program.
Try taking the batteries out, turn key to REG mode, turn power off for 5 minutes, then back on. Put batteries in.

------------------------

If anyone needs a Casio SE-S300 manual, try here:

http://the-checkout-tech.com/manuals/cashregisters/Casio_SE-S300_users_and_programming_manual.html

Hello, this is a link to the user manual for the Casio SE-S300 http://www.jrpos.co.za/manuals/Casio-SE-S300-User-Manual.pdf , it's onine as a PDF file, but it's also printable.

This is not a standard error code for the SE-S300. Can you tell me what you did to cause the error?

For E35, try this:
Turn key to program position 1 SUBTOTAL 0 Cash SUBTOTAL 3 SUBTOTAL 0 CASH SUBTOTAL
For shop name, you need to use the codes 132, 232, 332, 432. Are you using these codes for the lines? What happens when you try to change it?
------------------------------------------------------------------
For those of you looking for a complete manual for a SE-S300,
Operating and Programming manual: http://the-checkout-tech.com/manuals/cashregisters/Casio_SE-S300_users_and_programming_manual.html
Service (repair) manual: http://the-checkout-tech.com/manuals/cashregisters/Casio_SE-S300_SE-S2000_SE-C300_SE-C2000_TE-900_TE-1500_TK-950_TK-1550_service_manual.html

Turn key to Program 1 SUBTOTAL price (no decimal point) Item button SUBTOTAL
------------------------------------------------------------------------------------------------
The Se-S300 manual can be found here: http://the-checkout-tech.com/manuals/cashregisters/Casio4.php

You have turned the key before finishing a task. turn the key back to the last position and the error should go away. Now finish what you started in that mode before turning the key.
-------------------------------------------------------------------
If anyone is looking for a Casio SE-S300 manual,
OPERATION AND PROGRAMMING MANUAL http://the-checkout-tech.com/manuals/cashregisters/Casio_SE-S300_users_and_programming_manual.html


SERVICE (REPAIR) MANUAL http://the-checkout-tech.com/manuals/cashregisters/Casio_SE-S300_SE-S2000_SE-C300_SE-C2000_TE-900_TE-1500_TK-950_TK-1550_service_manual.html

Try a flag break first:

Turn key to PROGRAM mode. Turn power off at wall. Hold FEED down - keep your finger on it. Turn power on at wall. Wait 5 seconds, then let go of FEED. Press SUBTOTAL.
----------------------------------------------------------
If anyone needs a Casio SE-S300 manual, try here: http://the-checkout-tech.com/manuals/cashregisters/Casio_SE-S300_users_and_programming_manual.html