The main TV is fed via HDMI second tv is RG_6
Hi there Rick, my name is Kimberly and I form part of the Social Media Department with DISH. It is my pleasure to help you. A VIP 612 is a single receiver, meaning it can only control one tv independently, if you do have a second Tv connected it is mirrored correct? (meaning it watches/shares the same programming as the main TV connected directly to the receiver) If so, the TV connected with RG6 cable must be on channel 3 in order to receive a picture. Feel free to reach me at: [email protected] if you have any additional questions or concerns.
Kimberly Escobar
Social Media Representative
DISH L.L.C
SOURCE: Dish VIP 612 breaks up when playing back recorded shows.
Edy, I am not going to say that this is the definite issue but Dish only has receivers that are 1080i compatible at the time which will give you some blurring and possible pixellating. 1080p will resolve these issues in the future. Therefore if you still need help let me know.
SOURCE: I am attempting to control my Dish Network ViP 211
We can only offer codes for our remote. You will need to call Samsung at 1-800-SAMSUNG and get tthe code from them. Thanks for using Fix Ya.
SOURCE: Second level tv has a signal but the main tv on
Hello! It sounds like there are a few things that could actually be going on. If you are getting no picture on the TV(you have a black, blue, or snowy screen), you will want to make sure that the TV is on the correct channel and/or input. You will want to be on channel 3 or 4, and possibly on a Video 1 or 2 or HDMI 1 or 2 input. If that doesn't work, then try unplugging the receiver from the power source for about 10 seconds. If you are still not getting a picture, let me know!
If you have a signal loss message on your screen (Signal has been lost, Partial SIgnal loss, COmplete signal loss, or Acquiring signal), you will first want to unplug the receiver from the power source for 10 seconds. You will get the Acquiring singla message as the receiver reboots after you plug it in, but that should only be about 5 minutes at the most. If you get the message after 5 minutes, you will want to make sure that all of the cables going from the back of the receiver to the wall are tight. If that still doesn't do it, please let me know!
Becki Barned
DISH Network Customer Service
[email protected]
158 views
Usually answered in minutes!
×