SOURCE: need to change saw blade, lost instructions
1st, !!UNPLUG the saw!! Wear gloves to prevent nicks from contact with the saw blades.
If this is a handheld 'skill-saw' type saw, use a piece of wood to chock the saw blade from turning as you use a proper size socket/wrench to loosen the bolt which holds the blade.
The bolt will loosen counter-clock wise. It will probably be very tight, and you will have to use some effort to loosen it.
Remove the bolt, lift the follow guard and remove the blade.
Replace the blade with a like size diameter blade by raising the follow guard, inserting the blade, replacing the bolt, using a piece of wood to keep the blade from rotating and TIGHTEN the bolt. You will almost feel as if you need three hands to accomplish this procedure but its been done millions of successful times.
Good luck. :)
SOURCE: How do you replace a 9596 Fiskars paper trimmer blade carriage?
Take it to the middle and flex the slot open.
SOURCE: How to install new blade in buck Bros keyhole saw
There is a slot at the back of the blade. Bent the blade out enough to clear the notch in the handle and fold the blade down.
251 views
Usually answered in minutes!
×