Need kneading paddle

Claudia, links below for replacement paddle.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Amazon com Pillsbury 1020 1021 1025 PADDLE Bread Machine Kneading Blade...

https://www.google.ca/url?sa=t&rct=j&q=&esrc=s&source=web&cd=3&cad=rja&uact=8&ved=0ahUKEwjGtoSa2JjLAhWD2B4KHUApCCcQFggkMAI&url=http%3A%2F%2Fwww.ebay.com%2Fitm%2FEUC-Pillsbury-Bread-Maker-Blade-Paddle-Model-1020-1021-1025-FREE-SHIPPING-%2F221284989053&usg=AFQjCNHQxKqWBbEj-JaARhZ4bFS7z7MXwg

Pillsbury 1020 1021 1025 PADDLE Bread Machine Kneading Blade part maker...

Was the bar ever installed on your bread maker? Is this a replacement knead bar (paddle)?

The knead bar or paddle is taken out after the bread is finished baking and the loaf is removed from the bread pan.

The User Manul for your WestBend Bread & Dough Maker can be found here if you need further direction:

http://westbend.com/support/user-manuals/west-bend-manuals/breadmakers.html

Trust this is helpful.

I just purchased this 2 days ago and started to use it. I noticed the bread pan would wobble and was noisy during the kneading cycle. On the second use the paddle came off during the kneading cycle. Being a service technician all my life, I started to analyze the problem. I was previously surprised how loose the bread pan fitted into the bread maker and suspected there should be something to support the pan and hold it in place. I could not see anything obvious, but after looking carefully I noticed spring clips on the bottom of the bread pan, and also mating spring clips in the bottom of the bread maker. If I pushed the bread pan down fairly hard into the bread maker the bread pan would snap firmly in place. This stopped the wobbling during the kneading cycle and the paddle coming off. I could not find anywhere in the manual where it explained the bread pan must be pushed firmly down into place until it snaps in. The manufacturer should explain this to their customers on their website.

The knead bar for the West Bend 41053 Bread Maker can be found here:

http://www.westbend.com/catalog.cfm?dest=itempg&itemid=797&secid=87&linkon=subcategory&linkid=119

or

http://www.abtecparts.com/westbend_breadmaker_paddles.htm

You can order a replacement knead bar online from this site:

http://www.westbend.com/catalog.cfm?dest=itempg&itemid=784&secid=87&linkon=subcategory&linkid=119

Sorry someone has not responded sonner.

My recipe and instruction book gives me the p68-38 so. I can't find a model # 0n the machine anywhere.

Your paddle is probably worn out and has too much play in it. Some play is necessary to get it off for cleaning but it shouldn't be so loose it is coming off during kneading.

try here maybe measure your part then maybe a sub will work if someone can send you the specs.

http://www.nelsonappliance.com/search_results.asp?txtsearchParamTxt=paddle&iLevel=1&txtsearchParamCat=ALL&txtsearchParamMan=ALL&txtsearchParamVen=ALL&txtsearchParamType=ALL&txtFromSearch=fromSearch

west bend site.

http://www.focuselectrics.com/catalog.cfm?dest=dir&linkid=54&linkon=category