How to set my elgin sr626sw watch? - Elgin Calendar Day/Date w/Crystal Goldtone Case/Black Dial & GT Link Band Watch for Men

Set time on ELGIN PQS chrongraph thank you

Fixya https://www.fixya.com > Forum > Watches
Feb 10, 2010 - Rotate the stem clockwise to move the hands to the correct hour and minute. Depress the stem and wind the crown to keep the watch running. Read ...

https://www.google.com/search?q=ELGIN+FQ022+STEEL+PQS+CHRONOGRAPH+MEN%27S+WATCH+manual

..

• Setting an Elgin stem-set pocket watch. Pull the stem out of the crown at the 12 o'clock position of an Elgin stem-set pocket watch. Rotate the stem clockwise to move the hands to the correct hour and minute. Depress the stem and wind the crown to keep the watch running.

How to Set an Elgin Watch - Our Everyday Life

https://oureverydaylife.com > how-to-set-an-elgin-watc...
Sept 28, 2017 - There are three types of Elgin watches: The pocket and wristwatch produced ... Pull the crown out as far as it will go on any Elgin men's or ...

People also ask

How do you set an old Elgin watch?"); display: inline-block; height: 24px; width: 24px; margin-top: -1px;"> What is an Elgin watch worth?"); display: inline-block; height: 24px; width: 24px; margin-top: -1px;"> Are Vintage Elgin watches worth anything?"); display: inline-block; height: 24px; width: 24px; margin-top: -1px;"> Where is serial number on Elgin pocket watch?"); display: inline-block; height: 24px; width: 24px; margin-top: -1px;"> Feedback

Not familiar with this watch, but try this other FixYa answer :-

rfhutchinson

• 1 Answer

SOURCE:Elgin Sportsman How do I set the time?
Simple..there are 4 buttons on this watch. Right?...All four buttons push in...no kidding....HOWEVER the button at the five(5) oclock postion...PULLS OUT...this is the key..because this only button, pulls out, i
The digital display starts to flash....just experiment with pushing any button, BUT the five oclock and you should be able
To figure it out. After its set, then push the five oclock back to its origanal postiton...

Try replacing the battery!

Duracell Battery Silver Oxide Watch Electric 377 1 battery Duracell Battery Silver Oxide Watch Electric 377 1 battery SONY 377 SR626SW Silver Oxide Watch Battery 1 55V 29 mAh Low Drain SR626SW... CR2032 3V Micro Lithium Genuine KEYKO Lithium Button Coin Battery 50 pcs...

https://oureverydaylife.com/how-to-set-an-elgin-watch-12298144.html

That's the battery number for the watch also known as the #377. It's the most common watch battery in the world. Your model number is located at the bottom of the dial (face) below the six-o'clock position. You will need a 10 power jeweler's loupe or magnifying glass to see it and read it. Jot down the number and contact Elgin directly (MZ Berger Co,) for the extra links.
MZ Berger.

The movement in this Elgin is made by Citizen. After you change the battery, you need to reset the hands so that the watch functions properly. Select chronograph function with lower-right button. Then pull-out the same button. Push the upper left button to select the UTC, hour, and minute hands. Then use lower-left and upper-right buttons to make sure everything is aligned to 12:00 position. After setting the hands to 12:00, push in lower right button. Now you can set the time by selecting the SET using the lower right button. Pull out the same button and choose your time zone to set.