My screen display was rotate upside - TCL L32D20

Rotating the screen image is a feature of the graphics card and is normally caused by accidentally pressing a combination of keys. To correct it, hold down Ctrl and Alt and press one of the four arrow keys (up, down, left or right) until you have it the correct way up.

As your screen is completely upside down, hold down Ctrl and Alt and press the Up arrow key.

Alternatively, you probably have a Rotation setting in the display properties of the graphics card. You should be able to reach your graphic card settings, but reading and setting them properly may be difficult since everything you see on the screen is upside down until it's fixed.

If all else fails, try restoring the system to an earlier date when the display was right. This will reset the driver to its proper orientation.

I think you should go to the settings and make sure rotate is not turned off. Also, try to calibrate your screen again.

On your desktop right-click empty space and choose Graphics Options then Rotation then Built-in Display (if its there) then Rotate to Normal.

You can also try a shortcut with your keyboard Hold-down CTRL+ALT and then hit the UP arrow key to rotate the screen back to 0 Degrees.

change the rotation in desktop display settings.
right click select properties>settings>advanced there should be a tab with rotation settings at the top.

Hi.

You may have accidentally hit a sequence of keys and now your Windows screen is upside down.

Press Ctrl + Alt + arrow (left, right, up or down) to rotate the screen to the correct way.


Regards.

Hey,

Give the CTRL + ALT + *An Arrow Key*, if not try, CTRL + *An Arrow Key*, or ALT + *An Arrow Key*.

Sorry, I just forgot which one xD.

Good Luck,
Alec

There's a button on the original remote control that does exactly that:

(Please vote or comment if my solution helped you!)

Adjusting PICTURE FLIP Settings
You can set the orientation of the picture.
Directly setting the PICTURE FLIP
1 Press PIC. FLIP to display the
PICTURE FLIP screen.
2 Press PIC. FLIP to change the
setting.

Setting the PICTURE FLIP on the
MENU screen
1 Press MENU to display the MENU
screen.
2 Press a/b to move the cursor to
PRESET, and press ENTER.
3 Press a/b to move the cursor to
PICTURE FLIP, and press
ENTER.
4 Press c/d to select the desired
picture flip setting, and press
ENTER.
5 Press MENU to return to the main
screen.
NORMAL MIRROR ROTATE
UPSIDE DOWN
A•
The PICTURE FLIP screen automatically
disappears in 3 seconds.
• [NORMAL]: normal image
[MIRROR]: mirror image
[ROTATE]: rotated image
[UPSIDE DOWN]: upside down image

ALT + UP Arrow

Try connecting it to a different computer. If it's upside-down on another computer, then the panel is probably mounted upside-down. If it can be removed from the stand, remove it and see if it can be mounted the other way.

If it's correct on another computer, then your graphics settings are incorrect. Assuming you're running Windows, go to Display Properties, Settings tab, click Advanced button, look for a tab describing your video adapter (usually ATI or NVIDIA). In the video adapter's setup there is usually a Rotation option. The rotation option may be set to 180-degrees instead of Normal or 0-degrees.

Upside down or just sideways? There is a "rotate" button on the bottom of the screen that allows you to go from landscape to portrait mode.