301x amplifier Im looking for the schematics for a rockford fosgate 301x amplifier, can anyone help ???

Please be more specific. RF doesn’t share schematics

MJD44H11

• There is no fuse on the Rockford Fosgate Punch 801s. You should install an 80amp incline fuse within 6" off the positive battery terminal.
• I got you a schematic though if you need to dig inside the amp itself sometime. http://www.eserviceinfo.com/downloadsm/44100/rockford%20fosgate_801s.html just click "download" and it will drop into your PC.

Regards, Tony

Did you try contacting Rockford Fosgate? They have a website rocfordfosgate.com.

Hi,
I have few schematics of Rockford Fosgate units, let me know model number of amplifier to see if its schematics exist in my stock or not.
In case schematics does not exist in my stock, you need to contact Rockford Fosgate for required schematics.
Following schematics exist in my stock:
G250A2
G800A2 Punch 801S PC4333
TEBD10001
1001X
100X2
301M PC 4309H
551S PC4340A H500A2
600A5 PC1986E
601X
MOS 650SCH
PC1000SCH
Power 300SCH
Punch 2001X
Punch 500M
RF2000SCH
Thanks.

callem up im sure someone in tech dept. call help ya jus cus its not on a screen dosent mean rockford doesnt have it....i mean they made the amp n all .....u know

You should verify some other way (with a multimeter or another amp/device) that your 12V is working at the amp. Then to troubleshoot the Remote wire, take a short lead of scrap wire and run it from the 12V power input of the amp over to the Remote input like a jumper. If the amp still doesn't power up, then look for and check the fuse on the amp. If there's good power at the amp, the remote input has good power, and the amp doesn't turn on, and the fuse isn't blown, then the amp is probably toast. Good luck!

schematic is not totally necessary; the two channels are identical with the same topology, just most to comparate it for burned devices.
Example: two NPN transistors for CH1, two for CH2

one npn driver for CH1, the same for CH2

You can get it from Rockford.

Let me know if you need any help repairing it.

You may have open shields on the head unit. You need to check continuity between the shield and the case of the head unit. The following page shows you how to do it.


Shield Ground Repair