Problem in yamaha rx v800

Rav-212

a couple of subtitutes:

$133 and $55

http://remotes.com/remotes/servlet/rs?a=gmi&smodel=RXV800&brand_pn=YAMAHA_RXV800&mode=large&uuid=A13001399186991

or you could buy a whole RX-V800 WITH a remote for $136 delivered...

http://cgi.ebay.com/Yamaha-RX-V800-5-1-channel-500-Watt-Receiver-/260751483460?pt=Receivers_Tuners&hash=item3cb5ffe244

What if you DON'T use the remote? Does it shut down when just using it?

If SO, you have a bigger problem.

If NOT, it sounds like the remote is hosed - sending a code to shut off.

Do you have another remote of any brand that you could set to do something simple, like change volume? Don't train it from the original, though, or it would do the same thing.

The RX-V800 switches the various video signal types separately.
Since you are feeding S-Video to the TV the composite (yellow) input from your Wii is not going anywhere.
If you cant get S-Video output from the Wii then I'd suggest a simple Composite to S-video adaptor plug ($5 say). It worked for me with a Game Cube.
Cheers
BJ

thats cause your patch cable is mono get a stereo 3 ring connector.

email me .... [email protected]... ill send
you a copy of the codebook page... but let me try and locate it first, i have the same unit before. Yamaha code books are the same also to other models.

Reden

it can be accessed via the main unit controls but you need to go through your manuals. Maybe you can get your remote repaired still... maybe not badly damaged caused by corrosion.

[email protected]

I too am experiencing this problem.... and my receiver is only 5 months old. Its a RX-V661

your system goes on auto protect mode. it can be repaired even without the shcematics if this is the only problem.

what particular module is he asking for?

Change the batteries

Hi, You should try to see, on main board, the ground G2(TP00385), just to make sure if the screw is too tight. Its location on Schematic Diagram (Main) is E8. All the best, Rasgador