Question about Mitsubishi WS-55819 55" Rear Projection Television

Open Question

The screen works but gets cloudy like i increased the brightness all the way but i does it on its own and occaisionally goes yellow

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Screen not bright auto-brighness not working


To increase the brightness, either swipe up from the bottom to get the control panel, and increase the brightness there (slide the slider just below the 5 circles to the right) or go into Settings > Display and Brightness> Increase brightness using slider. You can also turn on the auto brightness from here if it is off, or turn it off if it is not working like you want it to.

May 13, 2016 | Apple iPhone Cell Phones

2 Answers

Sunlight prevents me from seeing my monitor


If you mean the LCD display on the back of the camera you can adjust the brightness in the camera menu. Press the menu button, move to the yellow spanner with 2 dots top right, below this you'll see LCD brightness, highlight this and press set you'll then go to another screen showing a scale 1 to 7 use the left / right button to move the pointer closer to 7 to increase the screen brightness.

May 19, 2014 | Canon EOS 600D Rebel T3i Digital Camera

1 Answer

How to increase brightness without fn+f6 keys because for now the f6 key is not working


Press and hold the "Fn," or function, key on your EEE PC-1000's keyboard.


Press "F3" while holding "Fn" to lower the brightness on your monitor.

The brightness on your computer decreases each time "F3" is pressed.


Press "F4" while holding "Fn" to increase the brightness on your monitor.

Each time "F4" is pressed, the brightness increases.


Press "F8" while holding "Fn" to decrease the volume from your EEE PC's speakers.

Each time "F8" is pressed, the volume decreases.


Press "F9" while holding "Fn" to increase the volume from your EEE PC's speakers.

Each time "F9" is pressed, the volume increases.


Press the "Ins" key while holding "Fn" to take a screen shot, or make a copy of what is currently on the computer screen.


hope this helps

Oct 08, 2012 | ASUS EeePC1000 1000H 1000HA 1000HC 1000HD...

1 Answer

Screen Black but Working


It goes black because it went into shutdown due to fault in the inverter circuits, check the 4 transistors in the inverter circuits for shorts, http://s807.photobucket.com/albums/yy352/budm/Dell%20E173FPb/

Feb 14, 2010 | Dell E173FP 17" LCD Flat Panel Monitor

1 Answer

My headlights are really dim at night. But everyone says there fine. what should i do?


The headlights on my Tahoe are dim too. It's also a 1999. I replaced my bulbs with Silverstar's but it was still dim. I used Mequiar's Headlight kit to polish off the yellowing and oxidized headlight's and it really made them look good but they are still not bright. They look bright but the light hitting the road is still weak. It's because the inside of my headlights are a little bit cloudy still. The heat damage from the bulb made the insides cloudy and the light is still weak on the road at night. That's all I can do unless I replace the headlight assemblies. Much money and not super simple to do. I have very bright bulbs just cloudy housings that still don't allow the beam to fully shine through. I don't know if that is your issue but I hope this helps.

Jan 27, 2010 | 1999 Jeep Grand Cherokee

1 Answer

How do i make my screen brighter on presario v2000


Decrease Brightness (fn+f7) The fn+f7 hotkey decreases the brightness of the notebook screen. The longer you hold down the fn+f7 hotkey, the more the screen dims. Decreasing screen brightness conserves power. » To increase screen brightness, press the fn+f8 hotkey.

Increase Brightness (fn+f8) The fn+f8 hotkey increases the brightness of the notebook screen. The longer you hold down the fn+f8 hotkey, the more the screen brightens. » To decrease screen brightness, press the fn+f7 hotkey.

Nov 03, 2009 | HP Compaq Presario V2000 Notebook

2 Answers

When HP laptop is pluged into power source screen goes dim


Right click on the battery icon in the taskbar, go to Power Options or something similiar. Change the plan settings for the power plan you're currently in. Check the brightness ratio for both battery and plugged in mode. This problem might come if you or someone had tinkered with the settings.

Jun 20, 2009 | HP Pavilion dv6000z Notebook

1 Answer

Exposure wheel does not seem to have the proper range.


the scroll button is already losing contact that why is not working properly..use a lighter fluid to the button then roll up and down untill the button is clean don't put to much fluid ok...

Aug 06, 2008 | Sony Handycam CCD-TRV68 Camcorder

1 Answer

Cloudy patches from backlight leakage in LCD TV


You have to send it back to company to fix this problem>

Dec 04, 2007 | Televison & Video

1 Answer

Screen`s brightness less


<Fn> + <→> Brightness up Increases the screen brightness.

<Fn> + <←> Brightness down Decreases the screen brightness

If tese dont work either your LCD lamp or board may be going bad.

Nov 18, 2007 | Acer Aspire 5600 Series 5630-6951 Laptop

Not finding what you are looking for?
Mitsubishi WS-55819 55" Rear Projection Television Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76115 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...