Zebra TLP 3742 prints first job then nothing

I am not able to detect bluetooth in Zebra rw420

If you are running Windows, then your printer buffer is trying to send the print job to the printer.
Look down below in the STATUS area near the time. See if you have a printer ICON. Select it and choos to CANCEL print jobs. Then after all jobs canceled, turn your printer back on.

So you have Zebra LP2844 or TLP 2844?
try diferent driver and print test page
www.seagullscientific.com

Ok 

First Properly connect all cables to new PC.
download new latest printer driver form given link blow

http://ftp.nicelabel.com/software/drivers/zebra.exe

download and install the new driver and try to print.....

if any problem persist please tell me ..what the OS you use in ur new Business pc.

well dear you POST ur this Question on "YahooAnswer" and "http://boston.craigslist.org" that great
may be it is helpfull to you.

happy to help u..

Verify that the ribbon fits into position, back and forth. You can also calibrate the label by pressing the button while powering up the printer and release the button.

This printer requires special software to print labels with. It uses a unique PCL language to work with. Thats why when you use these printers with Fedex or UPS software, it typically downloads forms first before working.

Zebra used to see a label designer program to work with it. You might want to check with them to see if they still carry it.

The printer only understands EPL code. (Eltron Programming Language) If you are trying to print text from DOS it wont understand (interpret) the txt codes.

To verify that the printer is working.

Open a DOS box, start the dos editor. Type Edit. Dos editor will open.


Type a single capital letter U. and print. Send to printer. The printer will print a configuration label.

EPL code to reset printer is

^default.


If you want to print a text file. use the Zebra Universal Driver. Zebra TLP2844. Open any windows application. E,G, Notepad. type text and send it to printer. Print as normal.

In www.zebra.com ZebraDesigner can download the software to design and print labels.

plz try to use in another port(if available) or try with another cable

Go to Control Panel, Administrative Tools (in Clasic view), and double click on Services. Scroll down and right-click on "Print Spooler". Start (or Restart) it and your printers will reappear in the "Printers and Faxes" window, and the spooler will try to send jobs to the printers again.

If you check the Properties of the Print Spooler, on the Recovery tab, you can set it to "Restart the Service". I set mine to Restart on the First Failure and Second Failure, and Take No Action on the Third Failure, in case something really needs attention.