I need instructions for following watch: Stainless Steel Case Back CR2016 Water Resist 30M China A126-06 38129KNX My tag is Whit

SOURCE: Need an instruction manual for my Casio Triple Sensor watch

Hi there!

This site is quite useful - http://www.theusermanualsite.com/

Just log in with your Email & postcode to get a PDF of the information it holds.

If this assists you, Please rate as Fixya! (It's free)

SOURCE: I bought a kenneth cole

Hi Junell ,you can't pulled out the crown,because it is threaded.First unthreaded it before you pull,first pull is for DAY/DATE adjustment.Second or full pull is for Hour / Minute setting,that's all.Feel free to ask and post a message,so i can assist..

hope this may help;

Regards,
VOTIT

DON'T FORGET TO RATE:

Arturs Kalnins

• 2338 Answers
• Posted on Dec 18, 2008

SOURCE: I have Minicci watch and

It is real. Manufacture in China is cheap and many of brand names are manufactured there.
Japanese movt is right and real as well as these are mass produced for many different brand names.

SOURCE: I have a kenneth cole men's stainless steel watch

Hi

I live in Australia and have dealted with watches for the past 2 years as a watchmaker's assistant.

Are you able to give me a model number as the stock number you have given above I am unable to see what kind of watch it is.

Generally YES glasses are able to be replaced. Mineral crystal glasses are the usual ones, but it depends on the type of case the watch has. If the case is unsual it may have to be ordered directly from Kenneth cole. If it's standard and round (and not domed in the middle) you can get a generic glass put in.

Is the glass smashed? If so it's adviseable to take it to a watchmaker, as small shards of glass may of gotten into the movement which will effect it's effectiveness later on in life.

Hope this helps?
Kind Regards
Shenlun

SOURCE: can't set time on aqualite watch-field ranger

I have an aqualite field ranger watch too. I lost the information but I found another notice for another watch and I was able to set the TIME as well as the alarm. I am not despairing as to one day set the date correctly! ;-)

The instructions I found are for "LIFELONG Chrono Alarm Sport watch" from Hanig & Company. The watch this particular instructions comes from has a rectangle LCD display that only takes the center of the dial, and only 3 buttons for the functions.

Aqualite has 4 buttons, but one of them is only for lighting the dial only, therefore if we use the 3 other buttons the same way they are described in this manual, it will work.

Aqualite has 4 buttons:
1) top right (we will call it S1 like this manual does)
2) bottom right (this will be S2)
3) bottom left (this will be S3)

As I said the number 4) (top left) is only for light and we will forget it since it is not needed to set our watch.

Setting the minutes, hour, date month and day:
Press S3 3 times, or until the following are flashing in the display : TU and seconds
Set the minute: press S2 once and advance by pressing S1
Set the hour: press S2 and advance by pressing S1
Choose from AM (A), PM (P) or military time (H)
Set the date: Press S2 and advance by pressing S1
Set the month: Press S2 and advance by pressing S1
Set the day Press S2 and advance by pressing S1
Press S3 to bring you to the time display

Setting the chronograph:
The chronograph feature will store and add to the last recorded time interval up to 23 hours, 59 minutes and 59 seconds in the time display.
1. Press S3 (flashing in the display: SU, FR, SA)
2. Press S1 to begin. Press S1 to stop.
3. press S3 to return to the time display.

Setting the lap time:
The lap feature will record from 1/100th of a second up to 23 hours, 59 minutes and 59 seconds.
In the time display.
1. Press S3 (flashing in the display: SU, FR. SA)
2. Press S2 to clear setting
3. Press S1 to begin. Press S2 to stop.
4. Press S1 once and S2 twice to reset.
5. Press S3 to return to the time display.

Setting the alarm and snooze:
The time alarm features with a convenient snooze function which will sound 5 minutes after the first alarm in the time display.
1. Press S3 twice for the alarm mode (hour will be flashing): advance by pressing S1
2. Press S2 once (minute will be flashing)
3. Press S3 to set alarm and return to time display
3. Press S1 to deactivate alarm
5. After 5 minutes, snooze alarm will ring. Pres S2 to deactivate.
6. Press S1 and S2 at the same time to deactivate the alarm at any time.

To test alarm
In the time display
1. press S1 and S2 simultaneously for alarm test.

Hourly chime
Your chrono alarm sport watch ha the option of an hourly chime in the time display.
1 Press S2 and then press S3 to activate hourly chime
2. Repeat process to deactivate