Quantum Leap Mind Station

Here you can find your driver:
http://www.qhmpl.com/Download-Drivers.html

Get a universal remote that will work with ur stero

Technical skills required to do this process, remove top,side doors, un lock carriage from service station, remove service station, clean & lubricate it for free movement, fix it back. try for print.. this is only solution for this issue, but mind that its dirty work...

phoned logitech today who have offered to replace the docking station free of charge as it was under warrenty.Will probably stick with them as a company
thanks for your offer of assistance will bear you in mind for a more complicated problem

Hi,

You can download the driver from the following link.

http://www.qhmpl.com/drivers.html

check the cables in the back of the ps2 and your tv.

try downloading this manual.
http://safemanuals.com/annexe_VERSION%202.1_ARCHOS_604-_E.htm

We got our daughter a Leapster2 for Chrstmas 08. One day the sound just stopped working. Called Leapfrog. They said to insert a cartridge, and turn the unit on. Plug headphones into the headphone jack. Then rotate the headphone plug-in 360 degrees,( It is easier to hold the heaphone plug-in and rotate the leapster2). Unplug the headphones and check to see if the sound works. Leapfrog said try it more than once, and if it does not work contact them,1-800-701-5327. We tried it and Hallelujah it worked!

Philippines Ban Kee Trading, Inc.
Eric Bautista
tel: (632) 371-9978 ext. 114
email: [email protected]
This appears to be the international distributer for those toys in your country. perhaps they will be able to assist you in finding a pen.
Did she lose the pen or it stopped working ?

Robert

We were having the same problem; my son (an we) were getting very frustrated! I finally tried to reboot the game and it seems to have worked. Take a paperclip and bend it; place the point in the small circular opening in the back of the game (there is two arrows next to the opening). We just did this and my son played past the point where it would shut down. The manual said that doing this would erase all of the memory...this didn't seem to happen.

Hope this helps!