Selected Server arwe not found consult network administrator Sharp MX B402SC PCL6

Hi,
Is there a little green light on in the furthest top right hand corner of the front keyboard? Also, is the standby button below the light in the up position? If so press it down, this is why the display is black.
Hope this helps.
Dave.

Follow the instructions below. A few quick changes in the port setting will allow you to print again, even though your machine needs maintenance.


Sharp Printer Offline Solution

Intermittent network problem.Check First?

This is a common error when using Sharpdesk and the Network Scanner tool. Take a look at my cheat sheet on how to fix this problem.


Sharp Scanner CE 02 Cannot Connect to Server Consult your Network...

this is a common error with Sharpdesk and the Network Scanner Tool. Your IP address has probably changed. Here are some instructions on how to resolve this issue and prevent it from happening in the future.


Sharp Scanner CE 02 Cannot Connect to Server Consult your Network...

You probably have incorrect log in details (Username & password)

If your network is set up to DHCP your leases may have expired and your server may have given new IP Addresses to the destinations you want to send to. Check in the settings of the MFP (copier) that the IP address matches what the IP Address (check at the computer as well) on the computer is. When all else fails (including reboot of all) reinstall the software.

In order to scan you need your smtp server adress and dns server address.You also need a valid e-mail address.In command prompt type ipconfig /all and find the details there

The new fire wall was set up with a password, free the password on the server setup, that should eliminate block.