Have sound but no picture

Sounds like you may have a bad convergance ic.

Unplug the tv and leave it unplugged for a couple hours. Plug tv back in press reset button. TV led may flash for a day but should come on. I did this last night to mine and it came on at 11am today.

Maybe your colour setting is wrong or worse your color tube is no good. You will have to change the screen settings (color). If it wont work probably color tube is gone.
Good Luck

Hello carriegomez,

It sounds like you shutdown circuit is being activated. This is due to excess current being drawn. This usually happens in the High Voltage section of the TV or one of the deflection stages. Due to the nature of this problem I would suggest that you take it to a local TV repair shop or have a TV repair person come out and take a look at the issue. The HV section is dangerous and should be dealt with by a qualified TV repair technician.

Thank you,
I hope this helps

Shuttle83

Seems to be the power button is stuck on the tv itself

Hello nicolastran,

I gave this advice to someone with this same problem so here it is again:

It sounds like your shutdown circuit is being activated. This is due to excess current being drawn. This usually happens in the High Voltage section of the TV or one of the deflection stages. Due to the nature of this problem I would suggest that you take it to a local TV repair shop or have a TV repair person come out and take a look at the issue. The HV section is dangerous and should be dealt with by a qualified TV repair technician.

Thank you,
I hope this helps

Shuttle83

try to resolder the convergence amp ICs that may help if not the ICs may need to be replaced. Let me know if you need further assistance.

Hello carriegomez,

I gave this advice to someone with this same problem so here it is again:

It sounds like your shutdown circuit is being activated. This is due to excess current being drawn. This usually happens in the High Voltage section of the TV or one of the deflection stages. Due to the nature of this problem I would suggest that you take it to a local TV repair shop or have a TV repair person come out and take a look at the issue. The HV section is dangerous and should be dealt with by a qualified TV repair technician.

Thank you,
I hope this helps

Shuttle83

Good Day, Ken;

This model boards are not available, they have to repaired to the
component level. This 2001 Model is known to have problem with fluid on the PC boards (from crt's). You should get an estimate from another factory authorized service dealer, or you should think about buying another TV.

Good Luck, big Irish.

GO TO DALBANI .COM THEY ARE LOCATED IN MIAMI FLORIDA