Mitsubishi WD-57833 57" HDTV Logo

Related Topics:

A
Anonymous Posted on Dec 03, 2012

My mitsubishi wd-57733 tv keeps blowing lamps

5 Related Answers

Anonymous

  • 58 Answers
  • Posted on Apr 18, 2009

SOURCE: Mitsubishi WD-52525 52-inch DLP HDTV ywllow warning lamp light

that means your lamp it is getting to the end of its life.
sometimes even if the lamp still good the TV will send you that message because that timer is closed to 5000 hours

What you can do is open the lamp door, closed again and the tv will ask you if you replaced it the lamp, and just say yes and that sign will go away

or just simple replace the lamp. 915P020010

Ad

lauracalla

  • 3 Answers
  • Posted on May 07, 2009

SOURCE: Mitsubishi WD-62525 timer light keeps flashing after lamp replace

There is a tiny reset button to the left of the timer light. Press with a pin or something small, wait 60 seconds. Viola!

Anonymous

  • 1 Answer
  • Posted on Oct 23, 2009

SOURCE: Mitsubishi WD-52631 HD TV lamp problems

So far I have had no good luck with Mitsubishi. I have had them send me two bulbs and had the tv repaired in the two years I have owned it. My last tv lasted 14 years with NO issue and didn't cost me $1400!! I have been told there is an air flow problem and power supply problems which both lead to low lamp life. I think that if Mitsubishi wants to avoid a class action lawsuit they need to start giving away free lamps for this model. Also, this is not localized to just the 52" tvs. My wifes ex has the 62" and it has the same issues.

phil_frye

Philip Frye

  • 295 Answers
  • Posted on Nov 20, 2009

SOURCE: Mitsubishi WD-65733 no picture, electrical buzzes in series

What it sound's like is that the lamp ballast is the problem. Buzzing sounds like when the power is first brought to the ballast it has to ramp up the voltage to get the lamp to light, then the voltage drops back down when the lamp is lit. Sounds like the lamp ballast isn't ramping up the voltage the way it should. May have to replace it. A good service shop would be able to do this for you.
Blessings,
A/V Media Guy

Testimonial: "very helpful. this was my first thought! thank you!"

Anonymous

  • 1 Answer
  • Posted on Jul 14, 2010

SOURCE: WD-62327 Lamp

OSRAM VS. PHILLIPS
This is about buying replacement bulbs for the WD62327 TVs.I dont know about the other models but I purchased a PHILLIPS replacement bulb and it worked for about a week and then those dumb flashing lights and no TV. I did some research and others were saying that you had to replace some condensers. Shop would do it for 600 dollars..Well i sent the bulb back and bought an OSRAM replaement bulb. The TV is now working perfect.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer

How do i fix a code 18 in my mitsubishi tv wd-57733?

Try with the remote the soft reset: Menu, 1,2,3, Enter.
1helpful
1answer

Hi, I have a Mitsubishi wd-57733 dlp tv that shuts down

Ballast is possible if repeated lamp failure but I have a solution I posted several times for this type of problem that works and is simple to try:

http://www.fixya.com/support/t12296849-turns_off_shortly_after_turn?mt_f=viewFull162
0helpful
1answer

I have a 57" mitsubishi

You probably have a bad lamp again I hate to say. These lamp are so critical when being moved. If after you atttempt to power on TV then red light shows, press menu+input on the front panel and hold for 5 seconds. Front timer LED will blink a 2 digit error code five times then stop. Code 34 and 66 are lamp errors, and if you read code 66 the lamp is broken. Good luck

Bill W
integrityhomeworx.com
1helpful
1answer

How to remove and install tv lamp for model wd 57733

See page 62 of this manual. Read the section titled "Lamp cartridge replacement". It has detailed info with pictures.
http://www.retrevo.com/support/Mitsubishi-WD-57733-TVs-manual/id/3124bh436/t/2/
1helpful
2answers

Lamp light is yellow. Replaced bulb still not working1

CHECK AND MAKE SURE THAT THE LAMP DOOR IS SECURE ON THE BACK OF THE TV.
0helpful
1answer

Mitsubishi Wd-57733 TV 57"

lamp is out call mits and order a new one do not use any other lamp but OEM
Not finding what you are looking for?

57 views

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1259 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...