At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Have a sunbeam heritage stand mixer model 2346-000.
Beaters spin fine; but mixing bowl doesn't spin but should. Mixer been used very little.Any ideas? or is it time for a new mixer.This one has only been used slightly. Thanks for any help.Barry D.
Thanks for your help. I'm going to keep the bowls and beaters and 86 the mixer. Not worth replacing motor for the price I paid for this new. Thx again. B.Thanks for your help. I'm going to keep the bowls and beaters and 86 the mixer. Not worth replacing motor for the price I paid for this new. Thx again.
B.
You can't post conmments that contain an email address.
Re: have a sunbeam heritage stand mixer model 2346-000.
Make sure the bowl is off to the side. I wouldn't get rid of a mixer just because the bowl doest't, if it's a good powerful mixer. There aren't many replacement parts available except directly from sunbeam. You need to get a replacement motor for the bowl turntable.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It is most likely that the 'shear pin' in the drive system has sheared. If it was 'new' someone bought it, over-worked it, packed it up and sent it back.
I believe that this particular model is supposed to have the bowl mix separately. I have removed the black piece from the bottom of the larger bowl in order to allow manual spinning. If I am able to figure out how to fix the bowl spinner I will make another post.
Don't know a solution, because I am having the same damn problem.
I am very discouraged with this product.
It is a piece of ****.
I am thinking about taking it out back and shooting it with my 270 I bought.
That is the only solution I know.
Try placing some "braces" rubber bands around the shafts of the beaters. This should tighten the hold of the shaft with the mixer and keep them more straight.
The beaters might be fixable/replaceable but the bowl not spinning anymore is the more serious of the 2 problems. If this is several years old iit probably is more cost efective/simpler to replace the whole unit.
i don't mean to be too basic, but have you used the slider at the mixer base that moves the bowl so the beater can be at the bowl edge or towards the middle? It works on ours, it's the black pad or button there at the front of the base, just push down and slide it. Maybe they made a cheaper model with no sliding base.
Thanks for your help. I'm going to keep the bowls and beaters and 86 the mixer. Not worth replacing motor for the price I paid for this new. Thx again.
B.
×