The back doesn't come off. On the back beside the cord hookup and beside Channel 1 Input are screws. You unscrew the two screws on either side. You then have four screws on the top of the amplifier. Unscrew those four screws and pull them out, six screws in total, then the amplifier will pull right out. You then pull the plug that attaches the speaker to the circuit board off and then you can do any kind of Maintenance or anything you want to the KB2
Contact Peavey toll free at 877-732-8391 or by email at [email protected],
SOURCE: Peavey KB 100 Keyboard Amplifier How to remove chassis?
I figured this out myself. I was just babying it too much. Some tolex had bunched up between the metal chassis and the cabinet making it feel like it was caught on something. I used a flat edge screwdriver to flatten out the tolex, and then I was able to pull the chassis out the back of the cabinet.
SOURCE: No sound will come out
It sounds like to me that you blew the speaker. We here at Pro Line Music are Peavey dealers. If you can not check for continuity of the speaker you can bring or send it in. 215-736-8055
338 views
Usually answered in minutes!
×