Question about Life Fitness 9100 Next Generation Remanufactured Treadmill

1 Answer

What's your problem?I have a life fitness 9100 hr I have a problem how do I clear the message waxer tank empty?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Life Fitness Master
  • 12,223 Answers

See this step and fix it. God bless you
Unplug the treadmill. Locate the console key and place the safety or reset key into the treadmill console. Replace any parts that need replacing, or move on to the next step.


  • 2 Locate the reset switch on the underside of the treadmill console. Usually the button is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the Q-tip to press the reset button. It may be necessary to hold the reset button down for a few seconds. "CL11" will appear in the display of the treadmill.
  • 3 Press the reset button one more time with the Q-tip. "CL21" should appear on the screen. Press the enter key. The display will change again and show "CL22." Keep pressing the enter key until the numbers cycle through to the number "CL26." Press enter one more time. The letter E should appear on the display screen.
  • 4 Press enter twice more. The letters "SS" should appear on the screen. When this happens, press the start/stop key. Making sure to keep well away from the tread, press enter to start the treadmill. The treadmill will start on its own. The treadmill will stop on its own after a few seconds. When it stops, press the power key two times. Remove the safety key and put in a safe place. Your treadmill is reset.
  • Posted on Oct 16, 2012

    Ad

    6 Suggested Answers

    6ya6ya
    • 2 Answers

    SOURCE:

    Hi there,
    Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

    Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

    Here's a link to this great service

    Good luck!

    Posted on Jan 02, 2017

    Ad
    vpaaf
    • 115 Answers

    SOURCE: 9100 life fitness treadmill

    Sounds like you need a new lower board replacement. You can get that for that treadmill by call lifefitness or sportsmith.com Please rate me good

    I’m happy to help further over the phone at https://www.6ya.com/expert/howard_079189dd4959a511

    Posted on May 01, 2009

    gymtech
    • 18 Answers

    SOURCE: treadmill wont run its saying waxer empty and

    Does this treadmill have a wax system ? If it does it will have side access panels on the side just above the rear leveler. The picture that shows here does not but need to be sure it does not really need wax.
    If it does not have a waxer- enter maintenance settings on display console,I do not have one in front of me but I believe you hold pause button down and press clear twice. This should bring up maintenance settings.
    Scroll using up down arrow untill you see replace wax bag or something to that effect. select [enter ] to save. press clear clear to restart.

    Posted on Feb 07, 2010

    • 11 Answers

    SOURCE: hi i have life fitness 9100 hr. it is not

    Could be a number of reasons - first to check would be the small micro switch behind the red "stop" button. these sometimes go faulty and will reset the machine at data entry

    Posted on Apr 27, 2010

    outfield502
    • 79 Answers

    SOURCE: Just got a used Life

    this problem is due to a false in the terminals that connect with the microswitch, you must remove the screen and back-side only remove the screws and tighten the terminal could also apply contact cleaner

    Posted on Sep 07, 2010

    ercupa190
    • 12223 Answers

    SOURCE: Describe your 9100 Next Generation

    Dear Sir:

    I will help you inmediately.

    1) Display does not illuminate
    when machine is powered
    on.
    Insufficient power source.
    Plug treadmill into a dedicated amp circuit.

    2) Loose 10 pin connection at
    display console or wax/lift
    control board.
    Check all electrical connections for proper
    attachment.

    3)Damaged main harness wire
    connection.


    4)Replace wire harness.
    Faulty display console or Wax/
    Lift Board.
    Verify if 8VDC is present at P1 pin, 3-4 and
    12VDC at P1 pin 9.
    a)If yes, replace Display Console.

    b) If no, replace Wax/Lift Board. See How To...
    Replace Wax/Lift PCB.

    Use VOM digital (Voltimeter)

    Hoping that you can resolve, if you need some extra help, please reach me.

    blessing.

    E.CUADRA
    MANAGUA, NICARAGUA. C.A.

    Posted on Sep 13, 2011

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    Life fitness crosstrainer 9500 HR just shut down few second after start


    see the video and fix it. This happen because the lack of maintenance schedule.God bless you

    Apr 04, 2013 | Life Fitness Crosstrainer, 9100, 9500 Rear...

    1 Answer

    Describe your 9100 Next Generation Remanufactured Treadmill Problem display shows waxer disconected ???


    Dear Sir:

    I will help you inmediately.

    1) Display does not illuminate
    when machine is powered
    on.
    Insufficient power source.
    Plug treadmill into a dedicated amp circuit.

    2) Loose 10 pin connection at
    display console or wax/lift
    control board.
    Check all electrical connections for proper
    attachment.

    3)Damaged main harness wire
    connection.


    4)Replace wire harness.
    Faulty display console or Wax/
    Lift Board.
    Verify if 8VDC is present at P1 pin, 3-4 and
    12VDC at P1 pin 9.
    a)If yes, replace Display Console.

    b) If no, replace Wax/Lift Board. See How To...
    Replace Wax/Lift PCB.

    Use VOM digital (Voltimeter)

    Hoping that you can resolve, if you need some extra help, please reach me.

    blessing.

    E.CUADRA
    MANAGUA, NICARAGUA. C.A.

    Sep 13, 2011 | Life Fitness 9100 Next Generation...

    1 Answer

    I can't reset a fault named "wax empty" and my equipment doesn't work life fitness 9100


    hit the stop button and hold down pouse key until the counsel repowers up and tougle throug to mantinace enter then tagel throug to waxer refill and hit enter

    Aug 13, 2010 | Life Fitness 9100 Next Generation...

    1 Answer

    Just got a used Life Fitness 9100 treadmill. When I turn it on and press sstart the display says enter weight. Before I can enter my weight and press start it resets itself back to the enter weight...


    this problem is due to a false in the terminals that connect with the microswitch, you must remove the screen and back-side only remove the screws and tighten the terminal could also apply contact cleaner

    Aug 07, 2010 | Life Fitness 9100 Next Generation...

    1 Answer

    How do i reset the waxer on a 9100 lifefitness treadmill?


    Press these buttons:
    101–ENTER–
    HILL–RANDOM–
    FIT TEST.

    Program lights come on. Display will scroll toWAX DELAY OFF.

    Press speed "UP" or "DOWN"
    to toggle to
    WAX DELAY ON or OFF.

    May 13, 2010 | Treadmill Doctor LifeFitness 9100...

    1 Answer

    I have a life fitness treadmill and put new wax in the blader how do i start the machine and put wax on the belt?


    you will need to go into service menu by pressing and holding the pause button then pressing the clear button twice , continue holding the pause until the service menu appears. then use the arrow up and select maintenance press enter then either use arrow up or down scroll and say refill waxer system or replacing wax bag press enter, this will reset upper console. Upon completion of this the go back into the diagnostic menu select system test press enter scroll up or down to waxer manual mode hit quick start and that will fire up the wax pump and your done

    Apr 12, 2010 | Life Fitness 9100 Next Generation...

    1 Answer

    Hi i have life fitness 9100 hr. it is not starting..after inter your weight..it shuts off


    Could be a number of reasons - first to check would be the small micro switch behind the red "stop" button. these sometimes go faulty and will reset the machine at data entry

    Mar 02, 2010 | Life Fitness 9100 Next Generation...

    2 Answers

    Treadmill wont run its saying waxer empty and notify maintainence


    Does this treadmill have a wax system ? If it does it will have side access panels on the side just above the rear leveler. The picture that shows here does not but need to be sure it does not really need wax.
    If it does not have a waxer- enter maintenance settings on display console,I do not have one in front of me but I believe you hold pause button down and press clear twice. This should bring up maintenance settings.
    Scroll using up down arrow untill you see replace wax bag or something to that effect. select [enter ] to save. press clear clear to restart.

    Feb 07, 2010 | Life Fitness 95Ti Remanufactured Treadmill

    Not finding what you are looking for?
    Life Fitness 9100 Next Generation Remanufactured Treadmill Logo

    445 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Life Fitness Exercise & Fitness Experts

    Vincent G
    Vincent G

    Level 3 Expert

    2361 Answers

    Craig Butler
    Craig Butler

    Level 3 Expert

    1730 Answers

    Android Man
    Android Man

    Level 2 Expert

    278 Answers

    Are you a Life Fitness Exercise and Fitnes Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...