- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if you follow the the video I have posted you should be able to tag inbound DDIs, the phone used is the new 14 btn samsung handset, the soft buttons an a 12 btn handset are down the side but apart from that the softkeys are the same. go to http://www.abbeytelecom.com for more of these.
Hi there and welcome at Fixya, the support team (lfete)
Sometimes, the user (the contact) update their names that they would like to show when other messenger contacts add his/hers contact to messenger . That´s means your contact name get reset to the default what the contact may have been chosen. You can always edit the name again by right-click on the name and choose edit name.
BTW: It happens some times that the contact names get reset of other reasons (bugs)
If you are using the KX-T7730 phone on a Panasonic KX-Txx 308 or 824 system. From the Switchboard / Main telephone ( usually ext 101, 10 or 9 ) with the handset on the cradle press PROGRAM * # followed by the system password ( default is 1234). Now press 604 and then SP-PHONE. Enter the jack number you wish to change ( 01 is extension 101, 02 is extension 102 etc. ). Enter the name ( basically the same as texting on a cellphone ). Press AUTO DIAL / STORE to save your change. To go to the next extension press SP-PHONE. Don’t forget to press AUTO DIAL / STORE to save your change after each name entered. Press PROGRAM to exit program mode and you are done. PLEASE rate / vote this answer if it was helpful. Thank you.
Replace the fuse with a ceramic fuse from Home depot! costs less than $3 and it will fix the problem. I had all the same problems as everyone else, you name it my microwave had it! you must remember replace it with a ceramic fuse! not a glass one. I know people say its the switchboard and all that nonsence but I promise you, the fuse plays a majoe roll in the microwave not working properly. Even though it doesnt look broken, a junky fuse can cause your appliance to do very strange things. I replaced mine 6 months ago and it works like its fresh out of the box.
By default a TDA user has access to the first 9 programs in the Basic Programming (000-009). It lets you set things like date and time, speed calls, extension name, number and PIN code, and operator extensions.
Access to the programming is from an allowed phone by PROG **1234. You may have to consult your installer/dealer to find out which phone does that, but generally it's the operator.