Oops something broke - Casual Collective Backyard Monsters

WELL BLUE SMOKE IS A CARBON MOST LIKLY A VALVE BROKE AND IT WOULD JAM A MOTOR

first check fuses. (test them)
then check for spark at all 4 cylinders. good.?
if not timed correctly (spark) with timing light, then the cam belt slipped. (oops not changed at 60k, oops)
if all that is good engine runs on test fuel, does it?
if yes, you lost fuel.
easy huh, watch scotty
https://www.youtube.com/watch?v=064Ilsz8Fzg&NR=1&feature=fvwp

Oops I thought I had answered that one. Looks like a mechanical problem, the latch can be broke. I don't think you can solve this problem yourself. If nothing got into the memory slot, I think something broke. Only once try another CF card, but if it is the same there must be a mechanical defect.

Check first your internet connection if it is good.. The notice "Oops! Something Broke." you have a slow internet connection to buff the Adobe Flash continuously.. But if have a good connection, some internet provider limits the bandwidth to process the buffering of the site..

Oops, dig deep into your pocket.
Checkout ebay for spare parts. I found then very useful.
Hope that helps.

Absolutely !! That motor is probably an interference motor, meaning the valves must be closed when the piston is up or they will interfere with each other and break something - or several somethings!! I have repaired cylinder heads from interference motors that had a timing belt break - it cost 3 times the rebuild cost due to the extensive damage done when the timing belt broke. It would be considerably cheaper to have the belt changed than to have the head repaired or replaced, as modern heads are thin walled - they will break before older heads would. It could also damage a piston and,as you have hypereutectic pistons balanced by weight ( must be within a couple grams of each other ) 1 piston cannot be changed - they ALL have to be changed, an expensive oops for sure!!!

Check all the connection from the motherboard something might be loose ...

Yep

you need to reseat the lcd connector. A Loose connecttion is the most common reason for a blank white screen.

Jyst buy a new camera all together and get something other than Samsung.