Can You setup Quntum A800

Are you sure A800 is the correct model number?

https://www.google.com/search?q=Toyota+sewing+machine+model+A800+manual

..

Hi

For making/reciving SIP calls with A800 u need its SIP firmware.
u can add me on MSN for more help.

MSN : [email protected]

I don't know the particular setup of this model, but some of my Polaroid a800 cameras actually have 2 triggers--1 main trigger which sets off the camera and flash, and then a smaller trigger just around the main trigger that only sets off the camera--no flash. So, look at the trigger and see if there's a smaller trigger (that looks like part of the main release..

thanks.

hi

get in the menu of the camera
and chose to reset it to factory mode

U can use Console access.
What u need is Hyperterminal + rs232 cable to access A800 via Console.


Hyperterminal can found on all Win OS : Programs > Accessories > Communications

for more help add me on MSN as :MSN:[email protected]

its a 5 volts dc u can use a computer power supply

Press MENU/OK to open the menu. Use the up/down-arrows to navigate to Setup (it should be the last item, marked SET) and press right-arrow. Use the right/left arrows to select Setup2 (the wrench with the digit 2) and press down-arrow. Use the up/down arrows to navigate to an entry marked with LANG and press right-arrow. Select "English" and press MENU/OK to confirm.

1st You download Webcam Driver.
Plz give me link of drier for quntum 500lm web cam
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

try to debug test the line .. maybe one of the line are loose..

Command line for termination A800 (Quantum)



Config unit 1# online 1

Config sys# mindn 10

Config sys# maxdn 20

Config pstntg 1# pass 0

Config pstntg 1# cassig 6

Config pstntg 1# super 3

Config pstntg 1# lamp 1 country code (91)

Config pstntg 1# Answerdel 120

Config pstntg 1# lamp 1 9101 01

Config pstntg 1# dis 1 a (ALL - ports)

Config pstntg 1# ena 1 a (ALL – ports)

Config gkadmin allow 1# ip xxx.xxx.xxx.xxx (GW ip + switch-ip)

Config dsp# voice 81 (for g723) voice 68 for (G729)

Config# submit




Local information

Name of this zone Hello
Country selection Canada
Local country code country code (91)
International prefix country code (91)

Hop-off PBX Numbers

91 public

9101 01 public

This configuration for termenation