Portforwarding: Incoming connections on port 80 not possible

It is an issue the Draytek and your phone.

Draytek displays as a web page. It uses HTML or XHTML
In order to see it on your phone it needs to be coded in XHTML Mobile 1.0

make sure you enable both tcp and udp port fowarding . worst case comes to worse reset it back to factory settings. or upgrade the firmware (i couldnt port foward until i upgraded my firmware on my wrt model)

Hi,

Regarding the issue that you guys have, here's some help that I can offer.

• AT&T ATT incoming mail server: pop.att.yahoo.com
• AT&T ATT outgoing mail server: smtp.att.yahoo.com (requires authentication)
• Incoming Mail Port: 995 (secure connection (SSL) checked)
• Outgoing Mail Port: 465 (secure connection (SSL) checked)

Thank you for choosing FixYa! sir. I hope it helped you out. Clicking on YES to vote for me will greatly be appreciated. Thank you!

You can enable autoproxy detect in control panel,internet options.connections.advanced.

You can simply forward ports. I believe you are using XBOX 360. Here are the ports that you need to open

3074 TCP
3074 UDP
88 UDP
80 TCP
53 TCP
53 UDP

You can open those ports using your router's Port Forwarding feature. To know more about portforwarding, you visit www.portforward.com

that 2wire only works with DSL services, if you are using cable internet then no it wont work. If the surfboard digital voice is just a VOIP router then yes, plug the surfboard into one of the ethernet ports on the back of the 2wire.

You need to login to your router and go to firewall or virtual servers.  In there you can setup port forwarding.  The goal is to forward external (internet) traffic to a specific internal machine (your PS3).  You do this on a per TCP/UDP port basis and must specify the appropriate external TCP and/or UDP port and internal TCP and/or UDP port.  Sounds harder than it is.
Or you can setup your PS3 in your router's DMZ (Demiliterized Zone).  This sets up the router to forward ALL internet sourced traffic to a specific machine (your PS3).  This is the easier way to do it so you don't have to worry about specific TCP/UDP port numbers.

The best page for portforwarding can be found here.
It mainly depends on the software and the ports used, so it might differ from application to application.
Portforwarding.com has excellent user guides.

Hi,

To my knowledge Toyota HG-J80 is an 80 series Land Cruiser powered by a 1HD-T diesel engine.

The 1HD-T belongs to the HD family of engines. The 1HD is 4164cc, 6cyl, turbo-charged, 4valves/cylinder, sohc, with bore of 94mm, and a stroke of 100mm, cr: 18.6:1. The T designate it as being turbocharged.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.