Leap pad pictures to a pc

In that case it needs repairing. It sounds like the button is inoperative. You could try electrical contact cleaner. Or return for repair. Or as Larry says, buy a used laptop :>)

https://www.google.com/search?q=leap+pad+plus+writing+repairs

..

Do a backup of the device and reset it. It should work after the reset.

call leap pad

I had the same problem with my laptop. The help I received at the tech office was zero. Maybe you can buy a second hand pad with intact screen to fit. Techos will want you to buy a new pad.

The easy way is transferring pictures from laptop to SD Card, then insert the SD card to I pad and you can show and transfer the picture from it.

Disconnect USB cable and plug it back in, making sure it's properly seated. Also check if your PC have at least 500 megabytes free space - sometimest that cause sync issues.

If you have the LeapFrog Connect software that came with the Leap Pad 2, then transferring photos, artwork, and videos is easy. Accessing those photos on your local hard drive is just as easy, although not very intuitive.

When you plug the Leappad 2 into the USB port of your computer, the software should open and ask you if you want to upload new content. After you choose "yes" that content can be viewed in the Creative Gallery. On the top right corner of the creative gallery, you will see a link that says "Local Files." I am including a picture to make this easier to find. The link will direct you to the place on your hard drive where all the pictures, artwork, and videos from your LeapPad are stored. You can then move them to any folder or harddrive on your computer.

The folder on my computer can be found at C:\Users\Public\Public Documents\LeapFrog - your folder is probably in the same place.

i think the anti virus software is blocking the leappad connect software. go to antivirus settings, under firewall rules, select allow for leappad connect the launch it and try again.

Get a new Leapster

I just had the same exact problem. We followed the leap pad recommendations for cleaning the stylus connection. Then we used a q-tip to clean the cartridge port and blew into it. Now it works.