Manual for bluetooth headphones FJ-800

Could be the laptop needs a driver installing for it to work.

Conventional bluetooth and wireless needs a 2-way signal so the item you want to connect will appear in the laptop wireless and bluetooth menus and you can click on it and enter a password or pin number.
If the headphones don't appear in the menus you won;t be able to connect them. In that case you should refer to the headphone instruction manual.

• Advanced Technology,The buletooth headphone ensure clear speech within 10 meters and high-fidelity stereo music .

Amazon com Bluetooth Headphone Charm sonic for Gym Runing Exercise Sports...

when u connect ur phone bluetooth to any other device it need a pass code! you have to give that from ur phone manually and the other device should have to put the same code so now u use the headset option to connect to the bluetooth not the normal bluetooth conectivity !

First try '0000' (four zeros). If it doesn't work, switch to '1234'. It it keeps failing, try '8888'.
Hope one of these codes might suit your case.
Cheers! Carlos

what is the key for my 8860 headset bluetooth

If you look in the manual in the link give by jeffsgirl903 it says "When asked for the Pass/PIN code during the pairing procedure,
please enter “0000” (4Zeros)."

Hi,
If you have lost the pairing on your phone with the headset follow these simple steps below:
• Setting the headset into pairing mode
1) Ensure the headset is fully charged
2) The headset must be switch off
3) Press and hold the on button for +- 8 seconds until the light flashes red-blue
4) The headset is now in pairing mode
• Searching for the headset on the phone
1) Go to “settings” or “connections”
2) Select Bluetooth, then options
3) Select Devices and click add
4) The phone should search for any available Bluetooth devices and display what was found
5) Select the Motorola device and click add
6) You will be required to enter in a pass code which is standard ‘0000’.
7) If successful then the headset will start flashing BLUE every few seconds.
8) If it’s a Samsung or Nokia phone you will need to “AUTHORIZE” headset on the device.
• The headset is now paired with the phone

Hope this helps

In addition to the power button, there should be two volume buttons on the side of the headset. Press and hold all three buttons to put the device into discoverable mode.

I have such a pair and they work great. As soon as I turn them on, they connect to my phone and my phone (Nokia N95) unpauses the music - instant bliss.