AEG OKO FAVORIT 40300 When switching dishwasher on no water is flowing into the the dishwasher
Please help
SOURCE: AEG OKO FAVORIT 6050 trips earth leakge
This is typical of a water leak onto electrical connection OR the electrical element has shorted internaly . Check this with a Ohm meter and itshould show the problem
SOURCE: drain pump keeps running AEG oko favorit
This seems like the anti flood system (polystireen float / micro switch) at the base of the washer is triggered,\. This puts the washer in pump out mode and stops inlet of water via the inlet solinoid. Dry the water on the base and then check for any water leaks. (pipe leak
SOURCE: we dont know how 2 turn it on just moved house n
Looks like what you need is available at
http://www.serviceforce.co.uk/pdfs/U20206.pdf
Good luck with the new house. Hope the dishwasher works well for you.
Try to run it with dishwasher cleaning kit (no utensils) to make sure everything is clean - that way you will get more life out of it. The cleaning kit (usually Finish) is sold in the supermarket in the detergent section.
SOURCE: AEG Favorit 40300 dishwasher - Works fine until it
I have the very same problem...did you get he problem solved? Could you please email me if you got it fixed? my email is:
[email protected]
Thank You!
SOURCE: Hi there, Do you have a
Hi ntalbany,
The Part Number is 8996461335607.
It can be found here:
http://www.apart4u.co.uk/dishwasher-drain-hose-aeg.html
Hope it helps :-)
If you found this solution helpfull, please rate my answer.
2,234 views
Usually answered in minutes!
×