Need to download videos from nv-gs57 to dvd in laptop

alot of software are not made to run on windows 8 so you might need to use windows 7 or even XP.

USB will only transfer the still picture.
For video you require a firewire cable.
Please note the sockets on the computer as they can be 6 or 9 pin depending on make/model.
The camera will be 4 pin.

Al

Hi! Panasonic Digital Camera would be my need NV-GS15 his software Windows the 7. -hez. Please writes it from where I would be able to download it. Best regards:

I don't think you do. According to the Panasonic document "Operating Instructions (PC-Connection)", your camera does not use a USB connection and did not even come with the software CD that was shipped with cameras that have a USB connection.

You need to use the Firewire (DV) interface to transfer videos, and this does not require drivers. It does require Windows XP with service pack 2 (or 3) and DirectX 9.0b/9.0c, and you will probably need to fit a Firewire interface card to the computer's internal PCI bus, as most Windows computers don't come with this connection. Whether this camera will work with Windows 7 is not covered by the document.

You then use various video editing software (commercially available or free downloads from the internet) to download the recordings. The software on the computer controls my Mini-DV camera, including rewinding and play functions to record from the tape in the camera.

You can obtain a copy of the Panasonic document from THIS LINK

Maybe, It doesn't work because the driver you installed. It is for other versions of operating system. I am also using windows 7 like you.Dont worry, You can still use your installer/driver from other versions of operating systems. Before you installing any program/driver in a windows 7 Operating System Computer, Use "troubleshoot compatibility". Right Click the Icon of your program installer first, then choose "troubleshoot compatiblity". This will allow you to choose on what type operating system your program will run. Just reply back if it still doesn't work.:D

you can download you NV-gs57 dv software from this link below

http://panasonic.jp/support/global/cs/info/vista.html

Hi,
Check if it has the firewire port. If so, you can get a 4 pin firewire cable and connect to the PC.
Switch on the Cam.
Open Windows Movie Maker and import video from device.


4 pin firewire would look like this:
http://www.pcab.co.uk/ebay/firewire%204%20to%204.jpg

You can use the Movie maker to burn it to the Disk

:)

I am not able to copy video from my panasonic digital NV- GS57GC to my PC.Pls help

first of all you should have your cd driver came with camcorder and as far as i know your driver isnt compatible with vista so better try to use windows xp. install the driver, plug your camcorder using your usb. upload your videos from your camcorder to your pc using ULEAD MOVIE MAKER. edit it and save it with any various types of videos. finish!

CHARCOIS

I need software only which is available in site how to down load free.