Lichfield Jova 6 Tent errection - Coleman 10' X 10' Sundome Tent 9160K101

Lichfield is owned by AMG now.

https://www.amg-group.co/brands/lichfield/

Suggest you contact them with your model name/number and they will be able to send you the instructions.

https://www.amg-group.co/contact/

Jo, you gave no make or model #, so Check the attached links,instruction and guides, the last link shows different type which you can google search for setup also.Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Wilderness Survival How to Put Up Dome Tent
How to set up 4 man tent
Instructions for Putting Up Camping Tent
Types of tent

Hi Debbie:
If you Google the make and model of the tent with the words "assembly instructions" or "picture" you should get all the info that you need.
Example..... Google "coleman tents" and you will get this link
https://www.google.ca/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=coleman+tents
It will give you lots of options to look at.

pitchingtips.org/lichfield-arapaho-6-pitching-instructions

www.lichfield-outdoor.co.uk

Hi I have the full instructions for pitching the Lichfield Condor Family Dome tent with 2 bedrooms if anyone wants a copy happy to email it :)

http://4.bp.blogspot.com/_8Z5Q7nkW8LU/TUTLj_6C_cI/AAAAAAAANSQ/E1SlacyAsEQ/s1600/tent.gif
see here

www.lichfield-outdoor.co.uk/Table/FAQs/

Peg out 2 back pegs of inner tent. Peg out 2 front then side pegs. Place smaller pointed pole through hole at bell end of inner tent from inside, longer pole through hole at front.Fit protective bases to each pole. Top pointed poles with separators. Assemble roof pole, put through loop and over separators. Throw outer tent over from bell end (needs 2 people) then carefully lead towards front til holes in roof match - back hole first. Fit rain hoods front and back. Peg outer tent from bell end first then back corners, front corners then sides. Place porch poles through holes at front of porch, zip door sides down with one person holding poles upright and taut and peg out door. Peg sides all along making sure they do not touch inner tent. Fix guy ropes.

Peg out the "brown" ground sheet of the inner tent and hold it up like a standard ridge tent.
Put the two shorter upright poles on the inside of the compartment (with something under the feet to prevent damage to the ground sheet). Put the 40mm tubes on the spike that pokes through, and then put the ridge pole on the outside.
Everything should then hold in place while you put the fly sheet over the top with the 2 longer poles at the front.......

tip - line up the seam on the fly sheet with the front of the inner tent as you peg it out....
Good luck