No power PDP-42BK 42 in. HDTV Plasma Television

Tries unplug,replug the tv an hour later might work.But this a temp.fix,must replaced the backlight video board sooner or later.

remove all the connection and try to fit somewhere else. the socket which is directly connected to the wall.or then it could be the tube problem inside call some service technician.hope this will help you.

the internal overload sensor is engaging to protect the system. The parts cost to replace the faulty board is about $70 But you need the skills to open the tv and change it I recommend you get a professional to do it More expensive of course but a lot safer.

sorry for the delay have not been here for a while, yes those are the caps.

I have a 42in Flat screen tv with a cracked screen made by Viore

the power board runs for about 3 yrs because of the wrong type of caps on the board other that that its the best plasma out there in my view.

Email this guy @ [email protected], he has planar parts to sell he might have a power board
or change the c97,c19 and c16 caps below is where I got mines.
Got it from a site called digi-key.com their phone # is 1800-344-4539. The part #s are EF6225-ND you need 1of these and E6105-ND you need 2 of these, the cost is $16 for all. Let me know how it went.

who changed the caps and what caps did they change, also there are two switches on the board one should be normal and the other on 30v

Did you get the tv fix?

You might want to contact them at http://www.planar.com/Products/TV_Large_Screen/plasma/index.html from there you can go support and then on line custumer service.