Top 20
LeapFrog ClickStart Educational Software: Scout Puppy Pals Questions & Answers
Mouse is not communicating with the unit
if u have connected after the system has started you need to restart it to make it functional ...
if its a 'USB mouse no restart requires...
if neither works probabily problem with mouse ..just replace it !!! instead of wasting time
11/26/2009 2:19:07 PM •
LeapFrog...
•
109 views • 0 helpful votes
I got a leapfrog click start my first computer
yes there should be two parts. First there is the actual computer and the second is the base (where the games are connected to). The television should be set where you would usually watch a dvd/or play
a game(depending on what model tv) the computer is wireless so you can use it from the sofa etc. but you must have the base in order for the game to work. I just purchased one and my son loves it.
3/8/2009 12:54:44 PM •
LeapFrog...
•
419 views • 0 helpful votes
Hi i recently bought a
If you plugged in a 9 volt power supply where you only needed 5 volts, you probably burned something out. Although the power cords have the same end, the voltages are critical. You can try to get the Leap Pad replaced but, I wouldn't get my hopes up.
1/31/2009 1:26:37 AM •
LeapFrog...
•
173 views • 0 helpful votes
Leap reader won't turn on
the pen wouldn't launch from app on the desktop or turn on manually for me either, You need to launch it through their website, it's a rollover button top right on the website page 'Launch Leapfrog Connect' the pen then auto turns itself on!
12/26/2013 3:07:19 AM •
LeapFrog Toys
•
21,297 views • 6 helpful votes
Leapreader won't turn off
Try pressing the on/off button to turn it off. I had a same problem. I depressed the on/off button for ~6 second or so and the device turned off. When I turned on again, the LeapReader no longer had a white light and was recognized by my computer.
2/1/2014 5:47:02 PM •
LeapFrog Toys
•
2,286 views • 0 helpful votes
Leapfrog ipad ultra black screen white dot
During a normal shut down, the screen image on a LeapPad will reduce to a white dot, which will disappear in five to ten seconds.
In rare circumstances, the white dot will not disappear and the LeapPad will not fully power down. If the LeapPad does not complete the shutdown process and the white dot remains on the screen for more than ten seconds, complete the shut down by pressing and holding the power button on the LeapPad for ten seconds. This will fully power the LeapPad down, and it will start up normally next time you power it on. For more information contact essay writing service reviews
Essaypaperreviews com Best Writing Services Reviews online
12/27/2013 5:06:31 PM •
LeapFrog Toys
•
826 views • 0 helpful votes
Low battery indicator
Have the battery checked first as it may not be connected properly or may be no good and not accepting a charge IF you run the machine off the adaptor it probably will not be charging the battery so I suggest you plug in the adaptor and leave the machine off for a few hours to see if the battery will charge.
6/4/2013 6:58:37 AM •
LeapFrog Toys
•
207 views • 0 helpful votes
How do i recalibrate the leapster gs screen stylus and screen
SolutionIf your Leapster system does not respond to the stylus pen, it needs to be calibrated. To calibrate your Leapster system:
- Turn the unit on and wait for the sign-in screen to appear.
- Hold down the Home, Hint, and B buttons simultaneously.
- When the screen changes, press the A button.
- Using the Stylus, touch the center of the targets.
1/28/2013 9:50:13 PM •
LeapFrog Toys
•
1,662 views • 2 helpful votes
Leapfrog leappad won't turn off
my leap pad ultra is at that part of turning off wher their is only a dot of wite left on the screen.it is still doing that and it has been at least 2 hours since i played it. it wont turn on either now.i am a kid sorry if their are spelling errors
1/9/2012 10:12:08 AM •
LeapFrog Toys
•
3,767 views • 0 helpful votes
Not finding what you are looking for?