Top 20
Sony Ericsson W910i Cellular Phone - Page 5 Questions & Answers
Hello,
I have problems with my
hello sir
reinstall the phone and try it.this process will maximum solve your problem.if still having the same problem then there must be some problem in hard ware component.maximum there will be problem in display screen.contact your device dealer,they may help you sir.
thank you
Require unlock or debranding code for w910i
NETWORK UNLOCK CODE:
You can unlock it by flashing your mobile if your mobile is a CDMA mobile...
The procedure for flashing your mobile is in the link below
http://hubpages.com/hub/How-to-Flash-your-cell-phone
It has an video explanation.
If
your mobile is not an CDMA mobile , you can get the network unlock
code(NUC) by just contacting the current network provider customer care
department.It is free of cost.
The restriction code can be got
from your old service provider..This restriction code is kept to prevent
someone who stole the mobile from using it with another provider...
They will have a security check done with your date of birth etc..to verify whether you are the exact owner of the phone..
After that they will provide you the restriction code to unlock it and use it with another service provider..
Do not pay anyone for this seeing some advertisement over internet . That is all fake ads.
The above procedure works and you can verify that by seeing the rating of an happy customer here..
http://www.fixya.com/support/t4979448-need_unlock_motorola_razor_v3_from_optus
How to search 3g
Hi kp4933,
To camp your phone to 3G, kindly check on your users manual on how to change your network setting to dual mode. In this way your device will camp to both 2G (GSM 850 / 900 / 1800 / 1900) and 3G (HSDPA 2100)
Hope this helps. Cheers!
Want to know the mnc
Well if you are tied to a particular network all you have to do is to unlock your phone to use it any other GSM network. You can get the unlock code through online. I will suggest the website
Unlock-Zone.com which is doing good service .....you can approach this website.
W910i Display not working..sometimes blurred
Hi there,
I think there is a problem with the battery connector and the display wire.The connector that connects the battery with the mobile phone is the problem and the display is like that because the wire to the display screen must be cut.please visit sony erricson service center,Do not worry its just a mild problem.
please vote me if i had helped.thank you
THERE IS A SIGNEL PROBLEM
Try and any software update. Go to setting and u gobs updates.
Also try keep the phone on and take the battery out it fixs error
Pop battery back in and turn on phone see it tat makes it better
Sound problem
Make sure that the serrated opening to the speaker/earpiece is not clogged orr dirty. Use a good brush to clean and open up any dirt accumulation.
Next make sure that the earpiece is working , test with a meter to check the sensitivity.
If there is good response from the headphones then it is possible that the speaker is faulty and should be replaced with the same type/size fittings.
My sony ericsson w910 mouth
the problem can be hardware or firmware but the 80% is the hardware the best thing would be for you to buy a new microphone that is placed in your phone if you are not determined to dissasamble ur phone then the best way would be to find an elctronics fixing shop and say your problem it should not cost much like 3-10 euros
It cannot detect phone line
hi friend,
there is a feature in your cellphone known as factory restore or settings. so, go to in your cellphone setting...it ask you for your security code enter it. it takes 10 to 15 minutes. your phone work as new phone setting. but, you first make your phone data backup in you PC & laptop.
if it not help then go for mobile software update in Sony Ericsson website.
Regard:
Rakesh
I can't detect my cp on computer
First connect your sony erricsson w910i phone to pc(USB Cable, Infrared or Bluetooth connection.)
Donwload the pc suite -->
click here to download .
Download the file to a temporary folder on your PC.
It is recommended that you uninstall any previously installed version of the Sony Ericsson PC Suite.
Execute the downloaded file.
When i come near 300m
It seems that your transmitter is not getting the proper power the capcitor attached with it is out of order replace it but do not do so by your self just get it repared by a professional repairer
To get my nck code
You can get the unfreeze code, NCK code and SPCK code from third party. After unfreeze your phone, you have to enter the NCK code to unlock and use it with any gsm network in the world. i will suggest the website
Unlock-Zone.com which is doing good service .....you can approach this website
My phone(w910i) does not load onto the internet,
Hi, the problem you are having is with the settings that are stored on your phone, the chances are these have never been setup correctly and you usually get this problem when you change the sim card in the phone to another sim or another network.
now all you need to do to solve this problem is call your service provider and tell them the make and model of phone you have got then ask them to send you the latest mms and wap settings.
your service provider wont charge you anything for doing this and they will send you the settings via text message this will then update your phone to the latest settings and you will be able to use the phone as you want to then.
you can sometimes send the settings to the phone yourself via your service providers web site, but not all service providers offer this service so you would have to check.
the quickest and easiest way would be to give them a call and ask them to send you the latest settings. they will do this for free so just give them a call and your phone will be then set up correctly.
let me know if you need further assistance ok
plz rate this solution as i have a whole page of unrated posts, thanks
mbn
Not finding what you are looking for?