20 Most Recent
Singer 8763 Curvy Computerized Sewing Machine - Page 6 Questions & Answers
I have a SInger 328K sewing machine that has quit working. Is there a reset button or fuse somewhere I can check before I have to take it to the repair shop?
no there is not a reset or fuse.. does the light work? if yes then you have power to the machine I'm pretty sure it's the foot peddle or a loose wire. ... although the foot peddle rarely goes out this way it can happen.. if it's not a big deal i would suggest taking it in for repair but if it's a financial hardship then you can unplug the machine remove the panel where the wires go in (two flat screws) and you will probably see if any wires are broken .. it goes back together just like it came apart.. next open the foot peddle they usually slide open by prying the clamp end and sliding it .. careful to keep your hand out of the way those sharp pieces bite. once inside you can again check for broken or loose wires.. there are youtube videos on these
Singer sewing machine. Have dusted, oiled adjusted over and over. May work OK a bit, then goes back to breaking thread so back looks like hair. Seems like thread getting caught in shuttle?
Sounds like there could be a burr or nick somewhere that is catching the thread and shredding it. Change the needle. Wrap your index finger with some fine fabric (old hosiery, chiffon, silk) and run it around inside the machine around the bobbin/shuttle, feed dogs, needleplate, presser foot. If there is a burr, you will probably find it. If it is minor, it can be smoothed with a fine emery board or fine sand paper. If it is major, you may need to replace the part.
...
Not finding what you are looking for?