20 Most Recent Westinghouse 78500 Casanova White Ceiling Fan Questions & Answers

You probably need new receivers.

Hello! W/D here.

In your ceiling box, you'll find 3 wires; black, white and bare copper.
In your fan, you'll see 4 wires; black (or red), white blue, and green.
With your breaker tripped, connect the green wire on the fan to the bare wire in the ceiling (this is your ground).
Connect the white fan wire to the white ceiling wire (this is your common).
Connect the blue and black (or red) together, and connect these to the black wire in the ceiling (this is the hot lead, and will supply power to the fan and the light).
Best regards, --W/D--

There could be 3 known causes.
1. The wires are not securely attached
2. Motor is fried and is sucking power it can transfer
3. A short in the switch.
You can try replacing the switch or tap directly around the motor itself and see if the brushes inside motor free up. You can also turn fan to on and try spinning by hand to see if she frees up

maybe a bad remote module in the fan

Sounds like all it needs is a new switch.

copy and paste https://usermanual.wiki/Westinghouse/WestinghouseSolana48InchTwoBladeIndoorCeilingFan7216100InstructionManual654842.308119644/view

English only on Fixya please https://translate.google.ca/?sl=auto&tl=en&text=Mi%20secadora%20Westinghouse%20no%20prende&op=translate Bad switch Bad start capacitor Bad door switch Failed motor Mal interruptor Condensador de arranque defectuoso Interruptor de puerta defectuoso Motor averiado ..

Bottom left corner

Searspartsdirect.com

There is no part like that in the fan kits. If you are talking about the box that is inside the ceiling with wires in it, you use the one that is already there IF IT WILL SUPPORT the weight of the fan. IF not you are going to have to get one or contact an electrician.

You need to feed the belt around the tensioner first but release the tension from the tensioner. Place something under it to keep it from expanding open and the feed the belt onto the drum. If you get it started you can turn the drum and it will feed itself onto the drum. Once that is done, align the belt visually for straightness and gently release the tension. Voila

I am so sorry but have no information for you.