20 Most Recent Neovo F-419 19" LCD Monitor Questions & Answers

please do not post the same question unless you have not received an answer within a reasonable timescale. Remember, we all do this in our spare time for free!

F-419 AGneovo monitor doesn't have this kind of plug.At least mine doesn't have one.I hope this helps.

You can spray the switches with WD40 and depress them many times.If that doesn't work then you have to replace all the switches if you can handle a soldering iron.

It has power problem...

You have dust on the micro switches on the front.You can resolve this by flicking the buttons on the front, or you could take it apart and clean the switches with a spray cleaner like wd40 through them making sure you mop up all the excess.

Window should have a driver already, but you can get updates from herehttp://f-419.drivers.informer.com/

Unfortunately theres not much else you can do, unless one of the buttons is stuck and visibly pushed in further than the others, it looks as though the control chip for your monitor is malfunctioning.

I have one of these that's now on its' way out but the problem you have is with dust build up on the micro switches on the front. The best way I can describe how I resolved this with mine is try flicking the buttons on the front, or if you're feeling adventurous, you could take it apart and clean the switches with a proprietry switch cleaner or blast a bit of wd40 through them making sure you mop up all the excess. Should give you about another 6 months or so from it.

I get most of my new lamps from www.lcdparts.net

Basic LCD monitor and TV troubleshooting guide: http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide http://www.fixya.com/support/r7406380-tv_training_manuals Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm/ Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

It sounds like dying power supply due to bad caps or shorts circuits in the power supply or in the backlight inverter circuits.

If you are going to DIY and have proper tools and know safety precaution then please read on: Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply (they should be replaced in a set), blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums Post back what you see inside so we can guide you further and it will help out other people in the future also.

Basic LCD monitor troubleshooting guide: http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting

http://en.wikipedia.org/wiki/Capacitor_plague Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

Your driver and manual is here, your link is half way down the page http://www.neovo-usa.com/canada/support/download.htm