20 Most Recent
Nokia 3200 - Page 8 Questions & Answers
CAN'T SEE!!
This is the problem of display. Remove your old dislay and clean display connectors and fit it.If the problem still come.Fit a new display
9/2/2007 11:48:01 PM •
Nokia 3200
•
Answered
on Sep 02, 2007
PhoneBook access problem
You'll need your security code. If you didn't make one try "0000" or "the last 4 of your phone number".
1. Press menu in the "stand by mode"
2. Select "settings" and "security settings"
3. Select "Memory" if will ask for your code.
4 you now have the option of either using the "phone memory" or the "SIM memory" or "both". Try both. See what happens then try phone only. Its up to you.
Here's the link: http://nds1.nokia.com/phones/files/guides/Nokia_3200_UG_en.pdf
8/21/2007 10:54:47 AM •
Nokia 3200
•
Answered
on Aug 21, 2007
Step by step on how to use the cellular phone
good am,when you buy a new cellphone there included a leaflet or sometimes a pocket like that gives the instructions on how to usa that unit that you have bought.in case you dont have that you have to browse the phone by your self just like the internet wen your new on it you dont get what you want to do but as long as you browse on it you may familiar with it.
5/6/2007 4:26:46 AM •
Nokia 3200
•
Answered
on May 06, 2007
My phoe turns off on own accord and reset button?
you have to look for a cellphone technician because your phone must change the program thats why it is always turning on/off.even you replace it with a new one battery the problem will be the same.the firmware that has been into your phone needs to be replace with the latest version of programs available to the shop of cellphone technicians.
5/6/2007 4:17:13 AM •
Nokia 3200
•
Answered
on May 06, 2007
HOW TO FLASH
Dear.
if u have a any sara soft box and ur phone is not power on first u have to check the phone from button after connectiong to cable. if check status is ok then first of all take mcu file the identification is that in most of the mcu file at the end there is "0" and its size in kb is the larger than other files. after if u have to take ppm file its is the language pack u want to install in ur phone. mostly at the end any single alphabatic such as a,b,c,d,.......... then take cnt file if that mobile have cnt option. then press the flash button flashing will be started when flashing complete then unlock ur phone by using "initial sim l ock" option. if during the flash the flashing is aborted then reconnect u mobile and flashing agian if same prob it may be the harware check for h arware.
3/15/2007 1:19:02 PM •
Nokia 3200
•
Answered
on Mar 15, 2007
Memory Problem
try using a data cable and Motorola phone tools if that doesn't work get mobiledit forensic version and see if that can't find your numbers.
3/2/2007 1:06:11 PM •
Nokia 3200
•
Answered
on Mar 02, 2007
Similar to submerged in water problem
It doesn't take very long for corrosion from sea water set in, and it's not that easy to effectively clean and dry it(drying isn't enough, salt water residue is left). Your dad helped it some, otherwise the phone would be completely dead, but some localized damage did happen. I think the SIM in this model is relatively exposed and it's likely that it suffered some of the water damage. Try another SIM and see what happens - if it works OK then you really got away with it with a slap on the arm, but I doubt that it's the only thing broken.
Good luck
6/27/2006 3:10:35 PM •
Nokia 3200
•
Answered
on Jun 27, 2006
Restriction code for Nokia 2690
It is normally recommended you Don't post your IMEI on websites. It is a security code for that phone.
Usually the IMEI number has to be reset by your network provider. It normally cannot be done directly from the handset. Did the handset accept the new sim card. Some handsets can be locked to a specific network and changing network can stop your phone from working.
Nokia 2730C-1. can I unlock the network
If the phone was not used 2012, the phone number and phone have been deactivated from the network you used to pay for service. You need to set up a new contract as they expire after about 2 years of inactivity.
..
Not finding what you are looking for?